| Application: | Wall Panel, Wall/Roof/Floor |
|---|---|
| Feature: | Environmental, Light Weight, Waterproof |
| Facing Panel: | Fiber Cement Board/Calcium Silicate Board |
| Samples: |
Shipping cost are required from the buyer
|
|---|
| Customization: |
|---|
|
Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
|---|
| Payment Method: |
|
|---|---|
| Initial Payment Full Payment |
| Currency: | US$ |
|---|
| Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
|---|
Suppliers with verified business licenses
Audited Supplier EPS concrete wall panel
with reinforced fiberglass cement panel as shell, is filled with lightweight aggregate concrete ( polystyrene concrete ) as core materials.
It is a new wall with the function of safety and environmental protection, solid, light, thin, high strength, impact resistance, hanging-resistant, earthquake resistant, fireproof, moisture proof, sound insulation, heat insulation, insect prevention, mothproofing, low drying shrinkage, low water absorption, easy cutting, easy installation, smooth clean surface, reduce transportation costs, can be recycled, etc.
|
Length
|
Width
|
Thickness
|
Application
|
|
2270mm
|
610mm
|
60mm
|
Floor & Roof
|
|
2440mm
|
75mm
|
||
|
|
|
90mm
|
|
|
|
|
100mm
|
Exterior & Interior Wall
|
|
|
|
120mm
|
|
|
|
|
150mm
|
|
|
Specifications
|
Technical Data
|
||
|
Anti pressure strength (Mpa)
|
>= 3.5
|
||
|
Sound Insulation Capacity in the air (db)
|
>= 40 (thickness 90mm)
|
||
|
Moisture Coefficient (%)
|
< 9
|
||
|
Heat transfer Coefficient (W/m.k)
|
<=0.25 (thickness 90mm)
|
||
|
Fireproof Limit (h)
|
>1
|
||
1. Long life & No fading
able character, and flammable character reach A grade to avoid fire.
2. Excellent Anti-corrosiveness character
The synthetic resin tile is coated with ASA material which can not be corroded by rains and snow, and resist the corrosion from acid, alkali and salt.
3. Waterproof
The resin material is compact and doesn't absorb water, its waterproof character is much better than earth tile, concrete tile and glass tile.
4.No deformation
The geometry dimensioning doesn't change even the outside temperature change greatly.
5. Light weight & Beauty
Synthetic resin tile belong to light weight material, thus reduce the load of buildings effectively, and increase the security, easy for fitting and transportation, lower the cost and improve the grade of quakeproof.
6. Self cleaning
It doesn't absorb dust, once washed by rain water, it would be clean as new
7. Easy installation
Large single area increase the installation efficiency, simple workmanship and complete accessory parts make the installation easy and quick.
| Item | Testing Indexes | |||||
| Thinkness[mm] | 60 | 75 | 90 | 120 | 150 | 180 |
| Anti-impact Capacity/Items [standard sandbags/times] |
≥5 | ≥5 | ≥5 | ≥5 | ≥5 | ≥5 |
| Anti-bending Damage Load [times over deadweight] |
≥3.0 | ≥3.0 | ≥3.0 | ≥5.0 | ≥5.0 | ≥7.0 |
| Compressive Stregth [Mpa] | ≥3.5 | ≥3.5 | ≥3.5 | ≥3.5 | ≥3.5 | ≥3.5 |
| Softening Coefficient | ≥0.8 | ≥0.8 | ≥0.8 | ≥0.8 | ≥0.8 | ≥0.8 |
| Surface Density [kg/m2] | ≤70 | ≤70 | ≤90 | ≤110 | ≤110 | ≤130 |
| Moisture Rate [%] | ≤10 | ≤10 | ≤10 | ≤8 | ≤8 | ≤8 |
| Drying Shrinkage Value [mm/m] | ≤0.5 | ≤0.5 | ≤0.5 | ≤0.5 | ≤0.5 | ≤0.5 |
| Hang Force [N] | ≥1000 | ≥1000 | ≥1000 | ≥1000 | ≥1000 | ≥1000 |
| Sound Insulation Capacity In The Air [dB] | ≥35 | ≥35 | ≥40 | ≥45 | ≥50 | ≥55 |
| Fire Endurance [H] | ≥1.5 | ≥1.5 | ≥2.5 | ≥3.0 | ≥4.5 | ≥6.5 |
| Heat Transfer Coefficient [W/m2.k] | ≤2.0 | ≤2.0 | ≤2.0 | ≤2.0 | ≤2.0 | ≤2.0 |
| Inner Radiation Index | ≤1 | ≤1 | ≤1 | ≤1 | ≤1 | ≤1 |
| Outer Radiation Index | ≤1 | ≤1 | ≤1 | ≤1 | ≤1 | ≤1 |
1. Lay out lines and carry boards into position.
2. Use hand-held chainsaw liberally according to wall specifications.
3. Sizing the bump slot and then spread the baseline and the bump slots with ZJT brand special cement adhesives.
4. Carry prepared panels to installation site, align and fit wall panels tightly with special tools, allow polymer mortar to fully extrude, and then temporarily secure with wooden wedges.
5. Alignment and fixing
Check perpendicularity and leveling corrections with a two-meter guide ruler. Then fix with 6mm or 8mm steel bars and ribs with construction sealant.
6. Slotting and piping
Slots are cut with a hand-held electric saw to allow for the burial of concealed wires and switch boxes.Fill with polymer mortar after installation.
7. Apply anti-cracking tape
8. Install door frame
9. Applying tiles, decorative panels, paints and wallpapers Adhere tiles or wood veneer panels and paints directly on the installed walls without plastering.Adhere tile or wood finish panels and paint directly to installed walls without plastering.
In the trend of low-carbon and energy-saving in domestic, ZJT is on a mission environmental protection, and actively promoting the development and popularization of green building materials. The composition of the materials of ZJT energy-saving wall panel strictly implements national GB6566-2001Building Materials Radionuclide Limited standard, which belong to the main of the radioactive building materials and a kind of decoration materials, 100% do not contain harmful substances in humans, and in high temperature combustion state, the release of excessive part also can be operated in an efficient range so it has no direct threat to human. At the same time, the construction of the product itself almost do not produce construction waste, in the demolition of buildings the product has the reuse rate of as high as 72%-93%, so these features make it surely become one of the most environmental protection administration of green environmental protection building materials.
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}