Lightweight Energy Saving Composite Sandwich Cement Panel for Exterior Wall

• Feature: Environmental, Fireproof, Light Weight, Soundproof, Waterproof, Moistureproof, etc.
• Fire Rating: 4
• Certification: SGS TUV
• Shipping Cost: Estimated freight per unit.: about shipping cost and estimated delivery time.
• Currency: US$
• Return&refunds: You can apply for a refund up to 30 days after receipt of the products.
• Model NO.: ZJT001
• Customized: Non-Customized
• Raw Material: Sand, Cement, EPS, Fly Ash, etc.
• Application: Warehouse, Partition Wall, Villa, Factory, etc.
• Advantages: Environmental, Heat Insulation, Easy Installation
• Soundproof: >42dB
• Earthquake Resistance: 8~13degree
• Wind Resistance: >13grade
• Fire Endurance: >4h
• Life Span: >70years
• Installation Height: >10m
• Construction Method: Dry
• Transport Package: Pallet+Corner Paper+Belt+Plastic Film
• Specification: 60/75/90/100/120/150mm
• Trademark: ZJT
• Origin: Xiamen, Fujian, China
• HS Code: 6810919000
• Production Capacity: 100000sqm Per Month
• Package Size: 227.00cm * 61.00cm * 10.00cm
• Package Gross Weight: 100.000kg

Product Description

Environmental and Energy Saving Composite Sandwich Cement Wall Board Product Description

Product Composition

Surface :fiber cement board/calcium silicate board
Interior filling materials: EPS / cement / fly ash / sand / additive  


Specification

Length	2270mm, 2440mm
Width	610mm
Thickness	60mm	75mm	90mm	100mm	120mm	150mm
Weight	40KG/m2	54KG/m2	60KG/m2	67KG/m2	74KG/m2	107KG/m2
Partition	roof	roof	interior wall	interior wall	exterior wall floor	exterior wall

The advantage of EPS Sandwich Panel:                            
*Light weight & Easy cutting & Fast construction
*Good Heat Insulation
*Good Sound Insulation
Heat insulation
Rapid installation and Fast consrtuction
Lightweight
Fire proof 
Water proof, Damp proof
Quake proof 
Sound insulation
Energy saving, Green, Environmental friendly
Strong hanging strength
Excellent surface finish
Unique tongue and groove
Dry working
Durable and recyclable


Properties:

Item		Parameter Index Specifications
		60mm	75mm	90mm	100mm	120mm	150mm
1	Anti-impact capacity/times	≥5	≥5	≥5	≥5	≥5	≥5
2	Anti-bending damage load/times over deadweight	≥3.0	≥3.0	≥3.0	≥3.0	≥5.0	≥5.0
3	Compressive strength/Mpa	≥3.5	≥3.5	≥3.5	≥3.5	≥3.5	≥3.5
4	Softening coefficient	≥0.8	≥0.8	≥0.8	≥0.8	≥0.8	≥0.8
5	Surface density(kg/m²)	≤70	≤70	≤90	≤90	≤110	≤110
6	Moisture rate(%)	≤10	≤10	≤10	≤10	≤8	≤8
7	Dring shrinkage value(mm/m)	≤0.5	≤0.5	≤0.5	≤0.5	≤0.5	≤0.5
8	Hang force(N)	≥1000	≥1000	≥1000	≥1000	≥1000	≥1000
9	Sound insulation capacity in the air(dB)	≥35	≥35	≥40	≥40	≥45	≥50
10	Fire endurance(h)	≥1.5	≥1.5	≥2.5	≥2.5	≥3.0	≥4.5
11	Heat transfer coefficient(w/m².k)	≤2.0	≤2.0	≤2.0	≤2.0	≤2.0	≤2.0
12	Inner radiation index	≤1	≤1	≤1	≤1	≤1	≤1
13	Outer radiation index	≤1	≤1	≤1	≤1	≤1	≤1
14	Frost resistance(shall show no visible cracks and surface without change)	_	_	shall show no visible cracks and surface without change
15	The combustion properties(A1 or A2)	_	_	A1 or A2

Application 
office,residential building,school,hospital,villa,
hotel,public construction,entertainment place,shopping mall.                    
wall,exterior wall,interior wall,roof,floor,prefab building
super high wall,abnormity wall,pipe,fire well,equipment partiton

How to install 

1. Set line: set line and carry panel in position.
2. Saw panel: use hand-hold eletrict saw to cut freely.
3. Sizing: sizing cement on tenon side of two panels then spread ploymer mortar on one tenon.
4. Installation: carry panel prepared to be installed panel.
5. Plant bar in wall and pillar:dry one hold in the original pillar or wall and fix panel by one steel bar.
6. Corret and fix: use one guiding ruler to check and level correction.
7. Plant bar in structure beam:drill one hole in structure beam and plant one reversed 7 type shaped steel bar to fix with wall panel.
8. Plant bar in floor: dirll one hole in floor and panlt 7 types shaped steel bar to fix with wall panel.
9. Plant bar between wall panel: plant one 200mm length steel bar in the angle or 45 degree to fix between two panels.
10. Install electric wire and switch: set lines on the place required to be settled with concealed wire and switch box.
11. Grout and fill slurry: fill and handle corrected wall panel with ploymer mortar.
12. Scrapping ash and sticking anti-crack cloth, coating:stick anti-crack cloth and brush coating after grouting slurry.

FAQ
1.Are you a manufacturer or trader?
Factory+trade(mainly factory, at the same time,we operates other related products)

2.Can we visit your factory?
Sure,welcome at any time,seeing is beliving

3.What's the MOQ of trial order?
No limit,we can offer the best suggestions and solutions according to your condition

4.Which payment terms are you accept?
T/T,L/C,etc. are available for us

5.After an order is placed,when to deliver?
7-15days

6.How to solve the quality problem?
If the products are not conform to customer samples or have quality problems,our company will be
responsible to make compensation for it

Company Information 
XIAMEN ZHONGJINGTAI BUILDING MATERIALS CO., LTD. is a professional high-tech research and development company producing new wall materials, machinery and equipment development, technology production and promotion of product applications. The company is situated in the charming Xiamen city, with the convenience of water and land transportation and only ten minutes from the airport.
We adhere to the "quality first, win-win cooperation" business philosophy and provide our value customers with strong technical support and package services. With our top quality products and credibility, we pledge to collaborate with our partners to thrive together while meeting the demands of the market. We are committed to contribute these superior and environmentally-friendly wall materials to the society. 
Company Honor



Contact Information

Xiamen Zhongjingtai Building Materials Co.,Ltd
Kevin
Unit 2A, Lianchang Builiding,No.6-8 Huli Avenue, Huli District,Xiamen,China