Concrete Lightweight Wall Panels for Hotel

• Feature: Environmental, Fireproof, Light Weight
• Fire Rating: 4
• Certification: ISO9001
• Shipping Cost: Estimated freight per unit.: about shipping cost and estimated delivery time.
• Currency: US$
• Return&refunds: You can apply for a refund up to 30 days after receipt of the products.
• Customized: Customized
• Materials: Calcium Silicate Board
• Core Material: Cement, EPS, Fly Ash.etc
• Advantages: Waterproof, Fireproof, Heat Insulation
• Size: 2440/2270X610X60/75/90/100/120/150mm
• Fire Rated Partition: 4 Hours
• Compressive Strength: 210kgf/Cm2
• Sound Insulation: 35-42dB
• Warrant/Uselife: 60-70 Years
• Samples: Available
• Auxiliary Material: Speicfic Mortar,Steel Bar, Anti-Crack Tape
• Transport Package: Pallet+Plastic Film
• Specification: ISO SGS
• Trademark: ZJT
• Origin: Xiamen, China
• HS Code: 6810919000
• Production Capacity: 200, 000 Square Meters Per Month

Product Description

Concrete Lightweight Wall Panels for Hotel

Product Description of Lightweight Wall Panels
ZJT lightweight wall panels is a kind of lightweight energy saving compound board material taking calcium silicon board(no-asbestos) as surface panel, with cement, EPS, fly ash as fillers and forming by one time compound. The product can replace construction materials as red brick, clay solid brick, air brick, color-coated steel sandwich board, gypsum block, wire spatial grid structure perlite board, perlite porous board etc.
It can widely be applied to wall materials of various high and low buildings such as: bank, office building, hospital, school, hotel, mall, amusement hall, active barrack, old house reconstruction, residence and workshop.



About ZJT Lightweight Wall Panels
1. The columns are inside the sandwich panel which makes it more beautiful and reality.
2. Compared with the earth building, the price is much lower and the installation time is much shorter.
3. Fire rate partition: 4 hours, reach to A level
4. Sound insulation: 38-46db
5. Thermal Conductivity: 0.221w/mk
6. Anti-earthquake: depend on the strength of steel structure (8 grade)
7. The using life is around 40-70 years.Environmental protection and economy.
8. Each worker can assemble 30~40 square meters every day, easy and fast installation.
9. Loading: 250-650square meters can be loaded in one 40 feet shipping container, it will depends on the size you need.

Lightweight Wall Panels Index

Item	Unit	60mm	75mm	90mm	100mm	120mm	150mm
Density	Kg/m2	40	48	60	66	72	83
Fire proof limit	hours	≥1.5	≥2	≥2.9	≥3	≥4	≥4
Sound Insulation Capacity	dB	≥35	≥39	≥40	≥42	≥45	≥45
Compressive strength	Mpa	≥3.5	≥3.5	≥3.5	≥3.5	≥3.5	≥3.5
U value	W/(m2·k)	≤1.64	≤1.37	≤1.22	≤1.03	≤0.93	≤0.75
Surface density	Kg/m2	≤70	≤70	≤90	≤90	≤110	≤110
Hanging nail force	N	≥1000	≥1000	≥1000	≥1000	≥1000	≥1000
Moisture Content	%	≤10	≤10	≤10	≤8	≤8	≤8
Anti-seismic	Yes
Windproof	Yes
Energy Saving	15%

 


Installation of of Lightweight Wall Panels

1) Setting the line and carrying the board into position	Eject double lines of board thickness up and down the axes of installed wall board, and easily carry to the side of wall according to the specification needed;
2) Sawing board	Using a hand-hold electric saw freely according to the specification of wall, which can reduce the loss rate;
3) Sizing	Sizing the bump slots and then spread the baseline and the bump slots with the special adhesives;
4) Installation	Carrying the board prepared to be installed to the installation place, correcting the wall board by gave lock and making it close tightly, and let the polymer mortar squeeze out into full and fixing it with a chock temporarily;
5) Correcting and fixing	Using the guiding rule of two meters to check the vertical and leveling correction. Then using 6mm reinforcing steel bar and ribs adding with construction sealant to fix;
6) Grouting and filing starch	Using ZJT special adhesives to fill the gaps between the corrected wall boards after one day later. Then putting the chock out and letting the corrected wall smoothly with polymer mortar;
7) Grooving and piping	Cutting a groove by hand-hold electric saw for buring the concealed wire and switch box, then filling with polymer mortar after installation;
8) Sticking anti-cracking tape	After grouting 3-5 days later, sticking anti-crack tape if need second decoration or attaching fiber mesh cloth;
9) Installing door case	Preparing a door and window hole on the installed wall, anchoraging it with splint or lines;
10) Facing ceramic tile, decorative sheet, coating and wallpaper	Sticking ceramic tiles, or wood facing panels and coating directly on the installed wall without plastering;

About us 

XIAMEN ZHONGJIGNTAI BUILDING MATERIALS CO.,LTD
Adress: Unit 2A, Lianchang Building, NO.6-8 Huli Avenue, Huli District, Xiamen, China
Website: http:// zjteps.en.made-in-china.com 
--We welcome you come and visit us

Contact Us