Fsat Installation / Construction EPS Cement Wall Panel EPS Polystyrene Foam
Product Description
Sandwich Panel, EPS Sandwich Panel
1 ZJT Sandwich Panel Type
-- With EPS grain
--With Ceramsite
2 ZJT Sandwich Panel Composition
Face: Calcium Silicate Board
Core: Cement+EPS Polystyrene Foam+Sand
Product Parameters
Item |
Parameter Index Specifications |
60mm |
75mm |
90mm |
1 |
Anti-impact capacity/times |
≥5 |
≥5 |
≥5 |
2 |
Anti-bending damage load/times over deadweight |
≥3.0 |
≥3.0 |
≥3.0 |
3 |
Compressive strength/Mpa |
≥3.5 |
≥3.5 |
≥3.5 |
4 |
Softening coefficient |
≥0.8 |
≥0.8 |
≥0.8 |
5 |
Surface density(kg/m2) |
≤70 |
≤70 |
≤90 |
6 |
Moisture rate(%) |
≤10 |
≤10 |
≤10 |
7 |
Dring shrinkage value(mm/m) |
≤0.5 |
≤0.5 |
≤0.5 |
8 |
Hang force(N) |
≥1000 |
≥1000 |
≥1000 |
9 |
Sound insulation capacity in the air(dB) |
≥35 |
≥35 |
≥40 |
10 |
Fire endurance(h) |
≥1.5 |
≥1.5 |
≥2.5 |
11 |
Heat transfer coefficient(w/m2.k) |
≤2.0 |
≤2.0 |
≤2.0 |
12 |
Inner radiation index |
≤1 |
≤1 |
≤1 |
13 |
Outer radiation index |
≤1 |
≤1 |
≤1 |
14 |
Frost resistance(shall show no visible cracks and surface without change) |
_ |
_ |
shall show no visible cracks and surface without change |
15 |
The combustion properties(A1 or A2) |
_ |
_ |
A1 or A2 |
Our Advantages
1) Heat insulation and Preservation The major material is polystyrene grains and other anti-freezing and heat preserving environmental protection materials, which could adjust the indoor temperature at a constant range thus achieving the effects of ecological adjustment.
2) Waterproof and Fireproof The face panel of energy-saving boards on both side are 5mm calcium silicate fireproof board and the main materials is a mixture of cement, sand, fly ash etc.
3) Sound insulation and Absorption The inside construction material (EPS polystyrene grain) functions well in sound insulation and sound-absorbing.
4) Easy construction and Time Saving For the same construction work that takes 12 people and 60 minuses to complete with traditional blocks, only 3 people and 60 minutes will do with boards, thus can save a lot of labor and time cost for the construction part.
5) High intensity and Quake Proof The energy saving boards are all with high intensity and the earthquake resistance can reach 8.5 magnitudes.
6) Space and Cost Saving For its thickness and lightweight features, the building area is largely increased and saves the cost construction structure a lot.
Applications
Floor System
ZJT light weight compound sandwich panel can be innovatively used as floor board. This system has the outstanding advantages such as hight load-bearing capacity, anti-static electricity, friction resistance, high strength, convenient for wire groove and water pipe inbuilt, corrosion resistance, no deformation, no split, etc., which is much suitable for the fields including the floor plate of additional top floor, factory, workshop, warehouse, etc.
Villa&Exterior Wall System
Light weight compound sandwich panel can automatically adjust indoor air and water content with the season and climate changes, and such ecology effect just goes with the tide of modern residential building.
Interior Partition System
Light weight compound sandwich board have been widely applying to the special positions like partition panel of high-rise and mega-high-rise buildings.
Roof System
Light weight compound sandwich panel roof system brings brand-new added value and application idea to the traditional roof construction. Its easy construction time, which bring out its hight integrated performance.
Installation Instructions
Step1: Alignment: Settling the base line of the installation position according the thickness of the wall panel.
Then putting the panels to the corrected position.
Step2: Sawing wall panel: Using a professional installation size, in accordance with the proportion add water to
turn into the pulpous state, using water brush wet for the wallboard of Waffle Blade, after applying in the
groove of wallboard, joint of floor and beam column.
Step3: Plastering the cement mortar: Before fixing the wall panel, clearing the dust firstly and then plastering the
cement mortar in concave and the joints.
Step4: Calibrating: After finishing to fix the wall panel, using the crowbar to calibrate the right position.
Step5: Adjustment : After calibrating sticking two steel bars to the wall panel fix except the wood wedges.
Step6: Filling joints: After the installation and adjustment, clearing the spilled mortar and using the steel to fill the
joints the depth 4-5mm.
Step7: After installation for a week taking out of the wood wedges and plastering the mortar on the joints.
Contact information
Denny Deng
Xiamen ZhongJingtai Building Materials Co.,Ltd
Address: Unit 2A, Lianchang Building, No.6-8 Huli Avenue, Huli District, Xiamen, China
Web: http://zjteps.en.made-in-china.com