| Application: | Wall Panel |
|---|---|
| Feature: | Environmental, Fireproof, Light Weight |
| Thickness: | 60-150mm |
| Materials: | Calcium Silicate Board |
| Core Material: | Cement, EPS, Fly Ash.etc |
| Attribute: | Nonmetal |
| Samples: |
|---|
| Customization: |
|---|
Suppliers with verified business licenses
Audited Supplier Insulation Lightweight Precast Concrete EPS Sandwich Fiber Cement Wall Panel for Outdoor and Indoor Wall Panel
Introduction of Wall Panel
EPS (expanded polystyrene board) wall Panel is filled with polystyrene EPS, cement and sand, to form a non-load-bearing light-weight composite wall panel. The wall panels on both sides are 5mm calcium silicate board, with the advantages of lightweight, economic, environment-friendly, Energy-saving, anti-earthquake, fireproof, waterproof, sound Insulation, heat Preservation, enlarge using area, easy and fast Installation, recycling use.
And 2270/2440mm(Length)*610mm(Width)*60/75/90/100/120/150(Thickness) sizes for optional,
Usually, we suggest to use 60~75mm thick for simple partition, 90~100mm thick for inner wall partition,
120~150mm thick for outer wall partition.
| ITEM | DESCRIPTION |
| Product | EPS cement sandwich panel |
| Composition | 5mm Calcium silicate board (face board) + EPS/Cement/Sand(core material) + 5mm Calcium silicate board (face board) |
| Character | lightweight, insulation, fireproof, waterproof, fast installation, and environmental etc |
| Application | Floor, Roofing, Wall, Villa, Prefabricate house, Building, School, Hotel... |
| Dimension | Length:2270/2440mm Width :610mm Thickness:60/75/90/100/120/150mm |
| Packaging & Shipping | Packed with plastic film, protected by belt and place in pallet |
| Sample | Free sample, shipping charge by customers. |
| Certificate | SGS, TUV, Fire insulation certificate, Sound transmission loss certificate... |
Features of of Wall Panel
1.Long life span
more than 70 years, it is used for construct permanent house, it is the best substitute for conventional concrete wall materials.
2.Earthquake resistance with Strong strength
Hanging fore for single point is more than 50kg, no need to worry about the safty .
3.lightweight, Easy and fast Installation
It only needs few hours to train a brick layer worker become a skilled worker for panel installation. And one worker can install 25sqm wall in one day. Besides, It requires only normal tools and accessories which you can get easily from your market.
4.Waterproof
Soundproof, fireproof, and heat resistance also.
5.low cost and can be re-used
disassembly and assembly are very convenient, it greatly improves the product efficiency and economic benefits, and also it will not result in too much construction waste and affect the normal operation activities.
Installation of Wall Panel
1. Setting the line and carrying the board into position.
2. Using a hand-hold electric saw cut to the sizes needed.
3. Sizing cement on tenon side of two boards, then spread specific mortar on one tenon side casually.
4. Carrying the board prepared to be installed to the installation place, correcting the wall board by
special tools, and making it close tightly. Then let the specific mortar squeeze out into full and then fixing it
with a wedge temporarily.
5. Planting bars in wall and pillar: drill a hole in the original pillar or wall, and fix the board by steel bars
6. Correcting and fixing: Using a guiding rule to check the vertical and leveling correction.
7.Planting bars in structure beam: drill a hole in structure beam and plant a reversed 7-shaped steel bar to fix with wall board.
8. Planting bars in floor: drill a hole in the floor and plant a 7-shaped steel bar to fix with wall board.
9. Planting bars between two boards, plant a steel bar in the angle of 45 degree to fix.
10. Installing electrical wires and switches: setting lines on the places needing to be set with concealed
wire and switch box.
11. Grouting and filling starch: filling and sticking the corrected wall board with polymer mortar.
12. Sticking anti-cracking tape.
After the mortar and wall are all shaped, sticking glass-cloth or anti-cracking tape, brushing coating.
Contact Freda
Freda Lin
Xiamen ZhongJingTai Building Materials Co,. Ltd
Website: http://zjteps.en.made-in-china.com
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}