Feature: | Environmental, Fireproof, Light Weight |
---|---|
Fire Rating: | 4 |
Certification: | SGS, TUV |
Customized: | Non-Customized |
Materials: | Calcium Silicate Board |
Core Material: | Cement, EPS, Fly Ash.etc |
Samples: |
---|
Customization: |
---|
Suppliers with verified business licenses
Structurally Insulated Sandwich Foam Panels Interior Partition Fireproof Cement Board
What makes wall board
5mmCalcium silicate board (face board) + EPS /Cement/Sand(core material) + 5mm Calcium silicate board (face panel)
Advantages
Application
1. Partition,indoor wall, outdoor wall of non load bearing wall
2. The renovation of the old buildings
3. Other condition which have strong requirements of the moisture proof, waterproof, fireproof, sound insulation.
Installation steps
1. Setting the line and carrying the board into position.
2. Using a hand-hold electric saw cut to the sizes needed.
3. Sizing cement on tenon side of two boards, then spread specific mortar on one tenon side casually.
4. Carrying the board prepared to be installed to the installation place, correcting the wall board by
special tools, and making it close tightly. Then let the specific mortar squeeze out into full and then fixing it
with a wedge temporarily.
5. Planting bars in wall and pillar: drill a hole in the original pillar or wall, and fix the board by steel bars
6. Correcting and fixing: Using a guiding rule to check the vertical and leveling correction.
7.Planting bars in structure beam: drill a hole in structure beam and plant a reversed 7-shaped steel bar to fix with wall board.
8. Planting bars in floor: drill a hole in the floor and plant a 7-shaped steel bar to fix with wall board.
9. Planting bars between two boards, plant a steel bar in the angle of 45 degree to fix.
10. Installing electrical wires and switches: setting lines on the places needing to be set with concealed
wire and switch box.
11. Grouting and filling starch: filling and sticking the corrected wall board with polymer mortar.
12. Sticking anti-cracking tape.
After the mortar and wall are all shaped, sticking glass-cloth or anti-cracking tape, brushing coating.
How to install
Contact Us
Ian
Xiamen ZhongJingtai Building Materials Co.,Ltd
Web: zjteps.en.made-in-china.com
Tel: 86-592- 5216902
Mobile: +8618577342631
Suppliers with verified business licenses