Good Price Damproof/Moistureproof Sandwich Wall Board EPS Wall Panel for Condo South East/Thailand/ Combodia/Indonesia
1. Composition of EPS Wall Panel
Surface: calcium silicate board
Interior filling materials: EPS(Expanded polystyrene)+cement+fly ash+sand+additive
2.Proficaton and Properties of EPS Wall Panel
| Item |
Parameter Index Specifications |
| 60mm |
75mm |
90mm |
100mm |
120mm |
150mm |
| 1 |
Anti-impact capacity/times |
≥5 |
≥5 |
≥5 |
≥5 |
≥5 |
≥5 |
| 2 |
Anti-bending damage load/times over deadweight |
≥3.0 |
≥3.0 |
≥3.0 |
≥3.0 |
≥5.0 |
≥5.0 |
| 3 |
Compressive strength/Mpa |
≥3.5 |
≥3.5 |
≥3.5 |
≥3.5 |
≥3.5 |
≥3.5 |
| 4 |
Softening coefficient |
≥0.8 |
≥0.8 |
≥0.8 |
≥0.8 |
≥0.8 |
≥0.8 |
| 5 |
Surface density(kg/m²) |
≤70 |
≤70 |
≤90 |
≤90 |
≤110 |
≤110 |
| 6 |
Moisture rate(%) |
≤10 |
≤10 |
≤10 |
≤10 |
≤8 |
≤8 |
| 7 |
Dring shrinkage value(mm/m) |
≤0.5 |
≤0.5 |
≤0.5 |
≤0.5 |
≤0.5 |
≤0.5 |
| 8 |
Hang force(N) |
≥1000 |
≥1000 |
≥1000 |
≥1000 |
≥1000 |
≥1000 |
| 9 |
Sound insulation capacity in the air(dB) |
≥35 |
≥35 |
≥40 |
≥40 |
≥45 |
≥50 |
| 10 |
Fire endurance(h) |
≥1.5 |
≥1.5 |
≥2.5 |
≥2.5 |
≥3.0 |
≥4.5 |
| 11 |
Heat transfer coefficient(w/m².K) |
≤2.0 |
≤2.0 |
≤2.0 |
≤2.0 |
≤2.0 |
≤2.0 |
| 12 |
Inner radiation index |
≤1 |
≤1 |
≤1 |
≤1 |
≤1 |
≤1 |
| 13 |
Outer radiation index |
≤1 |
≤1 |
≤1 |
≤1 |
≤1 |
≤1 |
| 14 |
Frost resistance(shall show no visible cracks and surface without change) |
_ |
_ |
Shall show no visible cracks and surface without change |
| 15 |
The combustion properties(A1 or A2) |
_ |
_ |
A1 or A2 |
3. Advantages of EPS Wall Panel
First, light energy saving, economical savings
1, Lightweight, quick and convenient for installation and construction.
2, Reduce the production cost of the wall.
Second, the environmental protection expansion of housing space
The raw materials used in the product do not contain chemical substances and radioactive elements that are harmful to the human body.
Third, fire and moisture proof waterproof
1, Fire prevention. The limit time of fire resistance of the product at a temperature of one thousand degrees Celsius is not less than three hours. The combustion stage does not emit toxic gases, and the non-flammability reaches the Class A standard.
2, Waterproof. Soak the sandwich wall panel in the water for a while, and take out, the sandwich wall panel keep drying.
3, Moisture-proof. The sandwich wall panels are placed in an outdoor environment in humid weather and there is no condensation water that collects in the humid atmosphere. The material is highly dry and is not affected by moisture.
Fourth, sound insulation, thermal insulation
1, Sound insulation. The wall has good sound insulation, its sound insulation is in line with the requirements of our residential sound insulation, and it is also much higher than the sound insulation effect of the brick wall.
2, Heat insulation. Due to the different manufacturing processes, it also determines the wall insulation effect. The different materials contained in the interlayer will also affect the length of the wall insulation.
3, Insulation. The effect of heat preservation is directly proportional to the effect of heat insulation. The effect of heat insulation is also a measure of heat preservation effect. Good insulation will make the indoor environment more comfortable.
4. Applications of EPS Wall Panel
1). Interior partition (60mm,75mm or 90mm is your best choice)
2). Exterior Wall (120mm, 150mm, 180mm for your reference)
3). Floor and roof
4). Prefabricated houses
5). Modern high-rise Building
6). Schools, Hotels, office
7). Indoor space of ecological residences
8). All kinds of houses and structures
5.Installation and Accessory Materials
1. Card Slot
| Specification |
Size |
| 150/120 |
150/120*60*1.5 |
| 100/90 |
100/90*60*1.5 |
| 75/60 |
75/60*60*1.5 |
2. Special putty powder for interior wall
1) Dosage: Theoretical consumption value: 1-1.5 kg/m2 (putty thickness 1 mm).
2) Mixing: The water required is based on the construction consistence required. After mixing evenly, place for 10 minutes and then mixing again when you apply.
3) Surface treatment: The wall surface should be solid and without ash and dirt, and the water content of the wall surface should be less than 5%.
4) Interface Treatment: If the wall surface is smooth or a new-type building material, such as gypsum partition board, polystyrene board, paper-faced gypsum board, etc., an interface agent should be used for interface treatment.
5) Leveling: Leveling of putty powder should be done in a semi-dry state (lightly pressed by hand without deformation). After curing, leveling with emery cloth is possible.
6)Product standard: JG/T298-2010(Y)
7) Construction temperature: Above 5ºC, the curing process temperature is not lower than 0ºC.
8) Storage and transportation: Store in a cool and dry place with a shelf life of 6 months. The product is non-toxic and non-flammable, and storage and transportation can be handled in accordance with the "Non-Dangerous Goods Rules".
9) Safety and environmental protection, efficient leveling, water and alkali resistance, durable and strong.
6. Contact Us
NEW THINGS ARE WORTHY OF BEING EXPLORED!!!
Do you have any question about our products?
Would you need more informarion about us and our activities?
Please take contact with us!
Freda Lin
Website: http://zjteps.en.made-in-china.com
Company: Xiamen ZhongJingTai Building Materials CO., Ltd.
Address: Unit 2A, Lianchang Building, No 6-8Huli District,Xiamen, China.
){kind=link}
){kind=link}