| Type: | Sandwich Panel |
|---|---|
| Acoustic Panel Type: | Acoustic Foam Panels |
| Wool Acoustic Panel Type: | EPS Cements Sandwich Panel |
| Samples: |
|---|
| Customization: |
|---|
| Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
|---|
| Payment Method: |
|
|---|---|
| Initial Payment Full Payment |
| Currency: | US$ |
|---|
| Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
|---|
Suppliers with verified business licenses
Audited Supplier Adjustable Durable High End Sound Absorption Wall Panel for Shopping Mall Store/Supermarket
Info of Wall Panel
Sandwich wall panel is a new type of energy-saving wall material. It is a wall material with the same appearance as a hollow floor slab, but it has male and female grooving grooves on both sides. When installing, you only need to stand up the board. Apply a small amount of cement mortar and then install.Sandwich wall panel has the advantages of light weight, high strength, multiple environmental protection, thermal insulation, sound insulation, fire prevention, rapid construction, reduced wall costs, etc .; its weight is only 1/8 of a solid brick wall. The thermal conductivity is only 1/3 of the solid brick wall, the acoustic wave conductivity is only 1/4 of the solid brick wall, saving wall cost by 15-20%, and the construction efficiency is improved by 3-5 times. In addition, it has outstanding environmental protection significance.
Features of Wall Panel
Light weight and high strength;
High hanging force;
High fire resistance and long fire resistance limit;
Good sound insulation effect;
Large thermal resistance and good thermal insulation performance;
Good waterproof performance;
The product has low shrinkage value and small shrinkage cracks;
The product surface is smooth and flat: the wall does not need to be plastered, and the amount of greasy unit area can save 1/3 compared with other walls;
Green and environmentally friendly building materials;
Increase the use area, good economic benefits;
Application of Wall Panel
1. Lightweight EPS sandwich panel as non-load-bearing internal partition wall can be used in hotels, hotels, schools, hospitals, office buildings, high-end apartments, stadiums, exhibition centers and other buildings to meet different customers' needs for modern and indoor indoor and outdoor environments. Claim. This product is simple and convenient for splicing and installation, more than 6 times faster than the block wall, which can greatly shorten the construction period, and the construction is particularly fast.
2. Hotel, ktv, meeting room, pay more attention to privacy and sound insulation. The lightweight EPS sandwich panel is a solid wall board, which meets the Chinese people's need for a solid wall. The closed microporous structure inside the plate effectively blocks the dual functions of sound transmission and sound absorption to ensure privacy. The air insulation is ≥48dB, and its sound insulation effect is better than that of ordinary aerated bricks.
3. For leisure and entertainment restaurants, due to the high strength of lightweight partition boards, it can hang heavy objects such as wall cabinets, air conditioners, and televisions: decorative plates can be directly nailed to the wall boards with iron nails. It can be sawed, nailed, drilled, cut, and the building pattern can be made at will. The surface of the lightweight partition board has good flatness, no plastering is required, and wallpaper, wall tiles, and spray coating can be directly applied after filling.
4. Workshops and factories (including steel structures). Lightweight partition boards are mainly considered as fire prevention and fire protection requirements as workshop and factory partition walls. Lightweight partition boards have undergone high-temperature combustion tests at 1000 ºC. The test requires that no harmful gas is generated during the combustion process, and it belongs to Class A fireproof materials.
Construction Process of Wall Panel
1. Grass-roots cleaning
Clean up the grassroots that needs to be constructed, and the mortar or concrete protruding from the wall must be cleaned with tools to facilitate the construction of the next sandwich wall panel.
2, Elastic line bin
Perform the elastic line operation on the ground and the appropriate position of the wall surface to ensure that the installed sandwich wall panel can be horizontal and vertical. Position and grade the edges of the partition wall and the edges of the doors and windows, and then select the plates with the same specifications according to the dividing lines.
3.Sizing preparation
Cut the sandwich wall panel as needed, pay attention to adjust the width and length of the sandwich wall panel to minimize unnecessary losses. Then mix cement and medium sand in a ratio of 1: 2, and then add building glue to prepare a paste. When sizing, first use the water to paint the uneven grooves of the partition board, and then apply the polymer mortar to the uneven grooves of the partition board and the baseline of the floor.
4.Install wall panels
Move the sandwich wall panel to the position where it needs to be installed, stand it up, and align it up and down with the baseline. Use a shovel to pry the partition board from the bottom of it, and then press the board firmly against the board. , Make the mortar overflow from the joint, and then temporarily fix it with a wooden wedge, check the flatness and verticality of the partition wall board. After the inspection is completed, the connecting part between the wall panel and the wall panel needs to be fixed with a special steel bar at an angle of 45 downwards.
5. Grouting construction
After the sandwich wall panel is installed and calibrated, it is filled with cement mortar with a mix ratio of 1: 2 and the building glue is blended. The upper and lower gaps of the wall board and the joints between the boards must be used as much as possible mortar to fill. In the process of grouting, if you want to bury a concealed pipeline or a switch box in the wall, you can use mortar to fill it after the installation is complete.
6, Finishing
If you want to install a door frame on a lightweight partition wall, you can use a splint to cover the door directly on the wall panel, fix it with iron nails, and then use a decorative panel for the cover. Finally, the surface of the partition wall is coated with paint. You can also choose to paste your favorite porcelain to achieve certain aesthetic requirements.
More information(catalogue, project, installation process) please contact
Freda Lin
Xiamen ZhongJingTai Building Materials Co,. Ltd
Website: http://zjteps.en.made-in-china.com
Facebook: Freda Lin
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}