| Customization: | Available |
|---|---|
| Color: | Gray |
| Materials: | Calcium Silicate Board |
|
Still deciding? Get samples of US$ 0/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Fire Resistance Concrete Wall Panel Insulated Wall Panel Interior Panel Construction for Factory/Warehouse/housing/Casa
Components of Wall Panel
Boards: smooth, non-asbestos, calcium silicate boards , 5mm thickness each side
Core: lightweight core of portland cement and expanded polystyrene bead aggregates
Finishing: no need for plastering
Between panels: tongue and groove system using adhesive material
No Smoke emission, No Toxic gas distillation and No Water penetration
Strength: No cracking, No breakage
| Weight : 67kg/m |
| Sound Isolation: 46 dB |
| Ultimate Wind Velocity: 324km/h |
| Fire resistance: 3 Hours |
| Axial Load Bearing: 14.7ton/panel |
| Bending load: 5.00 kN/m² |
| Thermal conductivity (k Value): 0.20W/M.C |
| Thermal Resistance (R Value): 0.50 M²K/W |
| (U Value): 2.0W/M²K |
Features of Wall Panel
1,High strength and not deformed
Because of the high strength and good overall performance of the lightweight wallboard, it can be used as the wall spacing with high height. As long as the steel structure is simply anchored, the steel is buried in the wall, and the wall is large span and high. The body does not need to increase the cylinder of the wall, and its impact resistance is 1.5 times that of the general masonry. Walls with a height of more than 3 meters should be as thick as 220 mm if they are made of general masonry. When the height exceeds 5 meters, the column is added, and the labor cost and the place are occupied.
2, Increase the practical area
Generally, the indoor partition wall can be made of composite partition wall board with a thickness of 75mm. It is 85mm thinner than the traditional 120mm wall and plastering. For each 12m extension wall, the utility area can be increased by 1 square meter, and the overall room area increase rate is 4-6%, the added value of the real estate of the property is higher than the wallboard cost. Generally, the masonry is at least 160 mm thick, occupying a valuable practical area. If you use the wall panel to make the inner partition, you can add a few square meters of the practical area by purchasing the same size of the house at the same price.
3, Lightweight, Arbitrary interval
Since the weight per unit area is 1/6 of that of a general 120mm thick masonry, the weight of the structural wall can be reduced, the bearing capacity of the beam and column can be reduced, and the indoor space can be arbitrarily spaced. A house is 180-200 tons (3 meters high) per 1000M2. An office building is reduced by 250-200 tons (3 meters high) per 1000M2. If the height of the house is more than 3.5 meters, the thickness of the masonry wall must be increased to 200mm. At this time, 600 tons can be reduced every 1000m2; the general masonry should be built above the beam, which can not be randomly spaced, which has great limitations.
4. Class A fireproof material
The composite wall board is burnt at 1000 °C for 120 minutes without damage. It has been tested by the National Fireproof Building Materials Quality Supervision and Inspection Center, and the fire performance has reached the national A-level standard to ensure absolute fire prevention. Generally, the masonry has no heat insulation function and conducts when exposed to heat, and not conducive to fire prevention.
5, Can be nailed, can be pasted
The lightweight wall panel can be bonded to the building lime sand, cement slurry, etc., and the wall decoration paste bricks need no special treatment. It can be nailed, drilled and anchored in any part. The single point hanging force is above 50 kg. Generally, masonry, especially solid masonry, can not be arbitrarily nailed, which brings trouble and difficulty to the later decoration work.
6, Construction is simple and civilized production
The installation process of the lightweight partition board is simple, the ordinary workers will be installed in a short time, the construction tools are simple, and there are no special requirements. The wall panel can be cut to adjust the width and length. During construction, the transportation is simple, stacking is hygienic, no need to be swayed, dry work, no mud, low loss, little waste on the construction site, and civilized construction. The weight of material transportation is 1/6 of the weight of the original masonry; general masonry construction waste is more, the construction site is dirty, chaotic, and poor, and the horizontal transportation and vertical transportation pressure are great.
7, High efficiency and short construction period
The composite wall panel is easy to install and does not need bricklaying, so it can shorten the construction period, that is, ready to use. The slotting is quick, the water and electricity pipeline is easy to install, and the construction efficiency is several times that of the general masonry. Install a wall panel (1.49) = masonry 120 standard bricks + 7.2M2 (double-sided secondary) plastering, every ordinary worker can install 30M2 wallboard on average every day, ie = technical workers masonry 1500 bricks +86M2 plastering.
8, Earthquake resistance, Anti-seismic
Since the composite wall panel is a fabricated wall, the panel itself is a three-in-one structure. The board is connected as a whole, and the impact resistance and bending resistance are all incomparable to the masonry wall. Generally, the masonry will hit a big hole when it is impacted; it will endanger life and property when the earthquake collapses.
9, Sound insulation
The sound insulation effect of the lightweight wall board reaches 42dB, which is in line with the national national sound insulation test standard GBJ121-88. Due to the high density and easy reflection of the material, it has a strong sound insulation effect, which is superior to the general masonry; the general sound insulation effect of the masonry is 35-37dB.
10, Moisture and Water resistance
Due to the special properties of fiber cement boards, the moisture-proof and water-resistant functions are particularly prominent. Experiments have shown that the wall panels can be cemented into the pool without any waterproof finish, and the back of the wall can be kept dry without leaving any marks. In the wet weather, the walls will not show condensation water. . Ordinary masonry is not moisture-proof, and it will be peeled off in a long time.
11, Environmentally friendly
There is no pollution in the production process of light wall panels. All materials of wallboards do not contain harmful substances and radioactive substances. They are in line with the National Standard for Radiation Hygiene Protection of Building Materials (GB6566-86) and are green products. The use of fly ash and coal gangue to recycle waste is extensively used, and the insulation function of the calcium silicate board could saves energy.
12, Low price
From the aspects of increasing the practical area, reducing the transportation volume, reducing the labor intensity, reducing the structural cost, and constructing civilization, the cost is very low. In terms of the practical area of 1 square meter per wall for each extension of 12 square meters, the wall panel has increased the use area. If we consider the use of lightweight wall panels from the design, it can reduce the standard of structural materials, and the overall cost of the building can be greatly reduced.
More information(catalogue, project, installation process) please contact
Freda Lin
Xiamen ZhongJingTai Building Materials Co,. Ltd
Website: http://zjteps.en.made-in-china.com
Facebook: Freda Lin
){kind=link}