Passive Fireproof Sandwich Panel House Design Foam Concrete House Holypan, Hotel Fireproof Building Materials Low Cost Concrete Wall Panels House eps dome house
Introduction
ZJT light wall board is light in texture and easy to install. Environmental protection is beautiful, heat insulation and sound insulation. It can increase the use area of the room. It is an environmental protection material and has the support of the state. Light partition can be cut at will, which brings great convenience and flexibility to the construction. And the variety of light partition board, strong selectivity, but also improve the grade of decoration, looks both beautiful and generous.
Feature
-
Energy saving environmental protection, no harmful substances, no radioactivity, can be reused, do not produce construction waste, widely used in all kinds of places.
-
The fire resistance limit of fire prevention at 1000 degrees Celsius is more than 4 hours, and it does not emit toxic gases, and its non-flammability meets the national class A standard.
3. Increase use area The wall material thickness is between 60-180mm,
which greatly saves the building space compared with the traditional masonry wall thickness.
4. Moisture proof and waterproofing There is no leakage in the container made of no waterproof veneer, which has good waterproof and moisture- proof performance, and is suitable for wet areas such as factory building, toilet, basement and so on.
5. Compression, shock resistance and impact resistance Because of the assembled construction, it is a three-in-one structure, and the plate and tenon are connected as a whole, and the compressive and anti- shock performance meet the national standard.
6. Heat preservation and heat insulation The wall material mainly uses the environmental protection and energy saving material of frost resistance and heat preservation, has the good heat insulation and heat preservation function, causes the indoor temperature to maintain a constant level, causes the environment to be more comfortable.
7. Nailable paste The wall board can be directly nailed or inflated bolt to hang the heavy object, the single point hanging force is above 50kg, the panel surface of the wall board is smooth and will not produce dust, and the tile, wallpaper, wood decoration board and other materials can be pasted directly for finishing treatment.
Advantage
Application
1) • Interior wall, Partition wall & exterior wall:
It has been widely applied to interior partition of high-rise buildings, with the advantages of excellent fire-proof, best hanging force and easy installation.
2) Floor System:
It's much suitable for the floor plate of factory, workshop, warehouse, etc.
Specification
Packing and shipping
1). Free packing, normal pallet + packing belt
2). Standard exporting packing, good pallet+pearl wool+corner protective paper+packing belt+plastic thin film
3). Loading: Normally 18 pallets per 20' container or according to clients' requirements
Install process
Light weight composite sandwich wall panels installation process:
1.Put wire,transport board in place,popup or down the wall plate and gauge double in the respective axis mount.
2.Any use of drilling to cut according to wall plate specifications.
3.Put cement binder and wall board in foundation.
4.Put cement binder,two pieces of the tenon on one side cement to wipe polymer mortar on any tongue and sides.
5.Installation,firstly prepare for the installation of plate moved into connection location,wall correction with a crowbar,use force tightly,to let polymer mortar extrusion from the joints in high spirits.
6.Adjustment,use wood wedge to bit into the bottom of the wall plate so that it adjust vertical formation
7.Correction,fix,use more than 2m or 2m guiding rule to check vertical,flat correction.
8.Grout,fill the pulp,use polymer mortar to infill and flatness after correcting the wall body,use polymer mortar to fill the gap size up or down.
9.Fixed,upper part of wall panels with Φ6mm or Φ8mm steel reinforce in the middle of walls by 45 degrees to bit into,the bottom with "7shaped"ribbed steel,one head is bitten into concrete base,the other head is bitten into the wall plate
Simple installation process:
1.Put wire 2.Cutting 3.Put cement binder 4.Put cement binder
5.Adjustment 6.Installation 7.Correction 8.Fill the pulp 9.Fixe
FAQ
1. Is EPS cement sandwich panel lightweight?
Yes, it is. Capacity six hundred and fifty to eight hundred KG per cubic meter, it is one sixth of brick wall, even is one half of aerated concrete block.
2. Is EPS cement panel fireproof?
Yes, it is. It control fire slipping out of the origin unit, prevent fire spreading, prevent toxic gas generating or insolating Through fire high temperature test for four hours, panels only have skin injury
3. Is EPS cement panel thermal insulation?
Yes, it is. EPS cement panel's composite material determines that it has excellent heat insulation and thermal insulation functions
4. Is EPS cement panel soundproof?
Yes, it is. EPS cement panel's surface is fiber cement board, interior composite material and the concave-convex grooves between two panels make it has excellent sound absorption and soundproof function. 100mm thickness isolate sound beyond 45dB, it's much higher than blockwork
5. Is EPS cement panel strength strong?
Yes, it is. Anti-impact performance is 1.5 times of the blockwork, With steel structure fixed, can make high levels, big span wall, overall anti-seismic performance is 10 times of normal blockwork
6. After installation can it be paint without putty?
Yes, it can. You can paint directly without putty, and also can decorate without plastering
Sales Manger:ZOE ZENG
Audited Supplier 
){kind=link}