High Strength Ceramic Prefabricated Composite Plate for Construction

• Customization: Available
• After-sales Service: 5 Years
• Warranty: 5 Years
• Model NO.: ZZ02
• Feature: Environmental, Fireproof, Light Weight, Waterproof, Sound Insulation, Heat Insulat
• Fire Rating: 4
• Certification: CCC, ISO9001, SGS, TUV
• Customized: Non-Customized
• Materials: Calcium Silicate Board+EPS+Cement and Other Access
• Core: Cement, EPS, Fly Ash.etc
• Usage: Exterior/Interior Wall, Floor, Roof, Prefab House
• Advantages: Waterproof, Fireproof, Sound Insulation, Heatproof
• Size: 2440/2270mm X 610mm X 60/75/90/100/120/150mm
• Fire Rated Partition: 4 Hours
• Compressive Strength: 210kgf/Cm2
• Sound Insulation: 35-42dB
• Warrant/Uselife: 60-70 Years
• Earthquake Resistance: 8~13degree
• Transport Package: Pallet+Plastic Film
• Specification: 60/75/90/100/120/150mm
• Trademark: ZJT
• Origin: Xiamen, China
• HS Code: 6810999000
• Production Capacity: 20000 Square Meters Per Month

Product Description

 High strength ceramic prefabricated composite plate for construction
EPS Cement Sandwich Panels Introduction
 

 ZJT ceramic prefabricated composite plate is used to embed strong electric box, weak electric box, thread pipe and other components needed for interior decoration into the wall in the process of producing silicate lightweight composite sandwich wall board.
Products have solid, light, thin body, high strength, impact resistance, strong hanging force, heat insulation, sound insulation, fire prevention, waterproof, easy to cut, without approval of swing, dry operation, environmental protection and other wall materials can not

Product Application                    

widely used:

1. residential building,school,hospital,prefab house,office,

hotel,public construction,entertainment place.
 

2. wall/exterior wall/interior wall/super high wall/abnormity wall,

roof,floor,pipe,fire well,equipment partiton

                    

 

 

Product Parameter                                    

 Product Specification

Length	Width	Thickness
2270mm 2440mm	610mm	60mm
		75mm
		90mm
		100mm
		120mm
		150mm

Technical Index 

	Item	Testing Indexes
	Model (Thinkness/mm)	60mm	75mm	90mm	120mm	150mm
1	Anti-impact Capacity [Standard sandbags/times]	≥5	≥5	≥5	≥5	≥5
2	Anti-bending Damage Load  [times over deadweight]	≥3.0	≥3.0	≥3.0	≥5.0	≥5.0
3	Compressive Stregth [Mpa]	≥3.5	≥3.5	≥3.5	≥3.5	≥3.5
4	Softening Coefficient	≥0.8	≥0.8	≥0.8	≥0.8	≥0.8
5	Surface Density [kg/]	≤70	≤70	≤90	≤110	≤110
6	Moisture Rate [%]	≤10	≤10	≤10	≤8	≤8
7	Drying Shrinkage Value [mm/m]	≤0.5	≤0.5	≤0.5	≤0.5	≤0.5
8	Hang Force [N]	≥1000	≥1000	≥1000	≥1000	≥1000
9	Sound Insulation Capacity In the Air[dB]	≥35	≥35	≥40	≥45	≥50
10	Fire Endurance [H]	≥1.5	≥1.5	≥2.5	≥3.0	≥4.5
11	Heat Transfer Coefficient [W/m^2.k]	≤2.0	≤2.0	≤2.0	≤2.0	≤2.0
12	Inner Radiation Index	≤1	≤1	≤1	≤1	≤1
13	Outer Radiation Index	≤1	≤1	≤1	≤1	≤1

Loading Information

Items(mm)	Single(piece)			Load by 20'GP			Load by 40'GP
	m³	Kg/pcs	Kg/m^2	Qty(pcs)	m^2	Tons	Qty(pcs)	m^2	Tons
2270×610×60	0.08	47	34	313	433	15	525	727	26
2270×610×75	0.10	67	48	252	349	17	364	504	26
2270×610×90	0.12	77	56	207	287	16	322	446	26
2270×610×100	0.14	87	63	189	262	18	280	388	26
2270×610×120	0.17	98	71	162	224	16	252	349	26
2270×610×150	0.21	147	106	126	174	18	147	204	26
2440×610×60	0.09	60	40	240	357	15	420	625	26
2440×610×75	0.11	80	54	204	304	17	308	458	26
2440×610×90	0.13	90	60	168	250	16	336	500	26
2440×610×100	0.15	100	67	144	214	15	240	357	26
2440×610×120	0.18	110	74	108	161	12	216	321	26
2440×610×150	0.22	160	107	78	116	16	156	232	26

 

How to install 

1. Set line:set line and carry panel in position.
2. Saw panel:use hand-hold eletrict saw to cut freely.
3. Sizing:sizing cement on tenon side of two panels then spread ploymer mortar on one tenon.
4. Installation:carry panel prepared to be installed panel.
5. Plant bar in wall and pillar:dry one hold in the original pillar or wall and fix panel by one steel bar.
6. Corret and fix:use one guiding ruler to check and level correction.
7. Plant bar in structure beam:drill one hole in structure beam and plant one reversed 7 type shaped steel bar to fix with wall panel.
8. Plant bar in floor:dirll one hole in floor and panlt 7 types shaped steel bar to fix with wall panel.
9. Plant bar between wall panel:plant one 200mm length steel bar in the angle or 45 degree to fix between two panels.
10. Install electric wire and switch:set lines on the place required to be settled with concealed wire and switch box.
11. Grout and fill slurry:fill and handle corrected wall panel with ploymer mortar.
12. Scrapping ash and sticking anti-crack cloth,coating:stick anti-crack cloth and brush coating after grouting slurry.

About Us                                                  

In the trend of low-carbon and energy-saving in domestic, ZJT is on a mission environmental protection, and actively promoting the development and popularization of green building materials. The composition of the materials of ZJT energy-saving wall panel strictly implements national GB6566-2001Building Materials Radionuclide Limited standard, which belong to the main of the radioactive building materials and a kind of decoration materials, 100% do not contain harmful substances in humans, and in high temperature combustion state, the release of excessive part also can be operated in an efficient range so it has no direct threat to human. 

 

Production area:  40,000m2

Stacking area: 60,000m2

Production capacity: 2,000,000m2 per year

Export quantity: over 600 containers per month

Customers' satisfication will be the best compliment for us!

 

Our capabilities speak for us!

 
   

 You can always truth us!

 

 

FAQ  

1. Q:How about your packing?

   A:Free packing: we use normal pallet and packing belt for panels.

• Standard exporting packing:good pallet,pearl wool,corner protective paper,packing belt,plastic thin film.  
• Packing size: 2270/2440*610*(60-150)mm 

2. Q:How about your loading?

   A:Our loading is normally 18 pallets per 20' container or according to clients'  requirements.

3. Q:What is your MOQ?

   A:A 20 feet container.

4. Q:How about your time of delivery?

   A:It's about 15 days after receiving deposit.

5. Q:How can we get samples.

   A:Our samples are free for your reference,you just need to pay for the freight.

6. Q:How about the payment terms?

   A:30% T/T in advance T/T balance before delivery.

Contact Information