Zjt Fast Build Styrofoam Lightweight EPS Wall Sandwich Panel for Prefabricated House Building/ Thermal and Sound Insulation Wall Board

• Customization: Available
• After-sales Service: 5 Years
• Application: Exterior Wall Of Building, Roof
• Model NO.: Lightweight EPS Wall Sandwich Panel
• Thickness: 100mm, 120mm
• Materials: Calcium Silicate Board+EPS+Cement and Other Access
• Core: Cement, EPS, Fly Ash, etc.
• Usage: Exterior/Interior Wall, Floor, Roof, Prefab House
• Advantages: Waterproof, Fireproof, Sound Insulation, Heatproof
• Hanging Force: >1000n
• Fire Endurance: 3~4 Hours
• Compressive Strength: >3.5MPa
• Sound Insulation: 35-42dB
• Warrant/Uselife: 60-70 Years
• Earthquake Resistance: 8~13 Degree
• Fire Rating: 4
• Certification: CCC, ISO9001, SGS, TUV
• Customized: Customized
• Warranty: 5 Years
• Transport Package: Pallet+Plastic Film+Belt
• Specification: 60/75/90/100/120/150mm
• Trademark: ZJT
• Origin: Xiamen, China
• HS Code: 6810999000
• Production Capacity: 200, 000 Square Meters Per Month
• Package Size: 244.00cm * 61.00cm * 100.00cm
• Package Gross Weight: 800.000kg
• Lead Time: 2 days (1 - 300 Square Meters) ; To be negotiated ( > 300 Square Meters)

Product Description

 Zjt Fast Build Styrofoam Lightweight EPS Wall Sandwich Panel for Prefabricated House Building/ thermal and sound insulation wall board 

This is a Good & New Choice for Your Construction on Hand or in the Future !

 Lightweight EPS Wall Sandwich Panel

ZJT EPS Sandwich Cement  Wall Panel   

  ZJT Light Composite Energy-saving Sandwich Wall Panel is the new type building material which could be regarded as the substitute of the traditional bricks.

With the advanced equipment and scientific method, our company obeys the strict crieria of production and has produced the evironmental and high quality wall panel. It is widely used in the wall partition,roofing and floor.The  technology of our  product  is the practice and a new breakthrough of the reform of  the  wall materials.

It will be your new choice to build your projects.

 

 

Product Composition

Surface : fiber cement board/calcium silicate board

Core materials: EPS / cement / fly ash / sand / additives

Product Advantages

1. Energy saving, Green, Environmental friendly 
The raw materials do not include harmful substances. 
Energy-saving effects of the building is greatly improved. It is also highly recommended  by the government.
2. Durable
70+ years building life span.
3. Strong Hanging Force
Hard surface and no damage after impacting. The hanging strength of Single spot is 100kg can be nailled and affix tile.
4. Fireproof 
Panels have a fire rating of 4 hours and A class of National standard.
5. Waterproof, Dampproof
No bead on wall panel surface in wet climate.
6. Sound insulation 
The sound insulation capacity in the air is 35db-45db (according to National standard: GBJ121-88).
7. Quakeproof   
More suitable for seismic & cyclone prone zones.
8. Unique tongue and groove 
Specially designed tongue and groove arrangement ensures a perfect joint and makes construction faster.
9. Rapid installation 
Being light in weight, handling & installation become very easy. One worker can do 20 sqm every day.
10. Dry working 
It is very convenient, less building rubbish left after installation and clean up easily.
11. Excellent surface finish 
The wallboard surface is level. You can plaster directly for inner decoration.It also can take all decorative treatment.


Product Application     

widely used:

residential building, school,hospital, prefab house, office,

hotel, public construction, entertainment place,etc.                   

 

wall/exterior wall/interior wall/super high wall/abnormity wall,

roof, floor, pipe, fire well, equipment partiton,etc.

 

Product Parameter                                             

 Product Specification

Length	Width	Thickness	Usage
2270mm 2440mm	610mm	60mm	roof
		75mm	internal/partition wall
		90mm
		100mm
		120mm	external wall/floor
		150mm	external wall

Technical Index 

	Item	Testing Indexes
	Model (Thinkness/mm)	60mm	75mm	90mm	120mm	150mm
1	Anti-impact Capacity [Standard sandbags/times]	≥5	≥5	≥5	≥5	≥5
2	Anti-bending Damage Load  [times over deadweight]	≥3.0	≥3.0	≥3.0	≥5.0	≥5.0
3	Compressive Stregth [Mpa]	≥3.5	≥3.5	≥3.5	≥3.5	≥3.5
4	Softening Coefficient	≥0.8	≥0.8	≥0.8	≥0.8	≥0.8
5	Surface Density [kg/]	≤70	≤70	≤90	≤110	≤110
6	Moisture Rate [%]	≤10	≤10	≤10	≤8	≤8
7	Drying Shrinkage Value [mm/m]	≤0.5	≤0.5	≤0.5	≤0.5	≤0.5
8	Hang Force [N]	≥1000	≥1000	≥1000	≥1000	≥1000
9	Sound Insulation Capacity In the Air[dB]	≥35	≥35	≥40	≥45	≥50
10	Fire Endurance [H]	≥1.5	≥1.5	≥2.5	≥3.0	≥4.5
11	Heat Transfer Coefficient [W/m^2.k]	≤2.0	≤2.0	≤2.0	≤2.0	≤2.0
12	Inner Radiation Index	≤1	≤1	≤1	≤1	≤1
13	Outer Radiation Index	≤1	≤1	≤1	≤1	≤1

 

How to install 

1. Set line: set line and carry panel in position.
2. Saw panel: use hand-hold eletrict saw to cut freely.
3. Sizing: sizing cement on tenon side of two panels then spread ploymer mortar on one tenon.
4. Installation: carry panel prepared to be installed panel.
5. Plant bar in wall and pillar:dry one hold in the original pillar or wall and fix panel by one steel bar.
6. Corret and fix: use one guiding ruler to check and level correction.
7. Plant bar in structure beam:drill one hole in structure beam and plant one reversed 7 type shaped steel bar to fix with wall panel.
8. Plant bar in floor: dirll one hole in floor and panlt 7 types shaped steel bar to fix with wall panel.
9. Plant bar between wall panel: plant one 200mm length steel bar in the angle or 45 degree to fix between two panels.
10. Install electric wire and switch: set lines on the place required to be settled with concealed wire and switch box.
11. Grout and fill slurry: fill and handle corrected wall panel with ploymer mortar.
12. Scrapping ash and sticking anti-crack cloth, coating:stick anti-crack cloth and brush coating after grouting slurry.

Accessory Materials
Cement Mortar
Steel Bar
Wooden Wedge
Electric Circular Saw
Anti-crack Tape

Loading Information

Items(mm)	Single(piece)			Load by 20'GP			Load by 40'GP
	m³	Kg/pcs	Kg/m^2	Qty(pcs)	m^2	Tons	Qty(pcs)	m^2	Tons
2270×610×60	0.08	47	34	313	433	15	525	727	26
2270×610×75	0.10	67	48	252	349	17	364	504	26
2270×610×90	0.12	77	56	207	287	16	322	446	26
2270×610×100	0.14	87	63	189	262	18	280	388	26
2270×610×120	0.17	98	71	162	224	16	252	349	26
2270×610×150	0.21	147	106	126	174	18	147	204	26
2440×610×60	0.09	60	40	240	357	15	420	625	26
2440×610×75	0.11	80	54	204	304	17	308	458	26
2440×610×90	0.13	90	60	168	250	16	336	500	26
2440×610×100	0.15	100	67	144	214	15	240	357	26
2440×610×120	0.18	110	74	108	161	12	216	321	26
2440×610×150	0.22	160	107	78	116	16	156	232	26

Packing 
Free packing: normal pallet + packing belt
Standard exporting packing: good pallet+pearl wool+corner protective paper+packing belt+plastic thin film
Loading: Normally 18 pallets per 20' container or according to clients' requirements

About Us                                                              

     In the trend of low-carbon and energy-saving in domestic and world wide, ZJT is on a mission environmental protection, and actively promoting the development and popularization of green building materials. The composition of the materials of ZJT energy-saving wall panel strictly implements national GB6566-2001Building Materials Radionuclide Limited standard, which belong to the main of the radioactive building materials and a kind of decoration materials, 100% do not contain harmful substances in humans, and in high temperature combustion state, the release of excessive part also can be operated in an efficient range so it has no direct threat to human. 

 

Customers'  satisfication will be the best compliment for us!

 

Our capabilities speak for us!

 
   

 You can always truth us!

 

 

FAQ                                                        

1. Q:How about your packing?

   A:Free packing: we use normal pallet and packing belt for panels.

• Standard exporting packing:good pallet,pearl wool,corner protective paper,packing belt,plastic thin film.  
• Packing size: 2270*610*(60-200)mm 

2. Q:How about your loading?

   A:Our loading is normally 18 pallets per 20' container or according to clients'  requirements.

3. Q:What is your MOQ?

   A:A 20 feet container.

4. Q:How about your time of delivery?

   A:It's about 15 days after receiving deposit.

5. Q:How can we get samples?

   A:Our samples are free for your reference,you just need to pay for the freight.

6. Q:How about the payment terms?

   A:30% T/T in advance T/T balance in US$ before delivery.

Contact