Light Steel Framing Fiber Cement Sandwich Panel Foam Panel House

• Customization: Available
• Feature: Environmental, Fireproof, Light Weight
• Fire Rating: 4
• Model NO.: ZJT-F
• Certification: ISO9001
• Customized: Customized
• Materials: Calcium Silicate Board
• Core Material: Cement, EPS, Fly Ash.etc
• Advantages: Waterproof, Fireproof, Heat Insulation
• Size: 2440/2270X610X60/75/90/100/120/150mm
• Fire Rated Partition: 4 Hours
• Compressive Strength: 210kgf/Cm2
• Sound Insulation: 35-42dB
• Warrant/Uselife: 60-70 Years
• Samples: Available
• Earthquack: 8 Grades
• Transport Package: Pallet+Plastic Film
• Specification: ISO SGS
• Trademark: ZJT
• Origin: Xiamen, China
• HS Code: 6903900000
• Production Capacity: 200, 000 Square Meters Per Month

Product Description

 Light Steel Framing Fiber Cement Sandwich Panel Foam Panel House 
 

Info of Sandwich Panel

ZJT Light Composite Energy-saving Sandwich Wall Panel is composed of face panel and interior filling. The material of face panel is thin fiber cement board or calcium silicate board,and the middle is filled with lightweight composite core material,including cement,EPS and fly ash. The quality and technology of product have reached to a new level and become the leading brand among the similar products.

The product has solid,lightweight,thin,better strength,impact resistance,hanging strength,heat insulation,sound insulation,fireproof,waterproof,easy cutting,pet and rot resistant,increasing usable space. It can be arbitrary slot,without batch file,dry operation,enviroment protection,which achieve energy conservation and energy efficiency. At the same time,this reduces the total area to be occupied by the wall and to raise residential practical area,alleviates the structure load,improves the building aseismatic capacity and safety performance,and reduce total cost. This production technology and application is the reform of our country wall material,is a new breakthrough.

The company relying on advanced equipment,first-class technology,excellent quality,strong,productivity,favorable customer service system,has set up the good brand image in the market,and been widely recognized by the same.

Advantages of Sandwich Panel

1. Light weight: The wall weight is about one third of the brick wall, which reduces the building load and reduces the construction cost.
2. Thin body: The thickness of the wall is about one half of that of the brick wall. The wall occupies less area and has a large practical area.
3. Solid core: the wall is non-foaming, no hollow drum, can be slotted, digging, single-point hanging force exceeds 50 kg.
4. Fast: The wall adopts the assembled dry construction method without plastering, and the construction efficiency is 5 times higher than that of the masonry method.
5. Fire resistance: The wall has good fire resistance and heat insulation performance. The wall temperature is only 60 ºC when it is burned at 1000 ºC for 1 hour.
6. Waterproof: The wallboard is directly cemented into a pool without waterproofing. After being filled with water, it is left for 48 hours without leakage.
7, Sound insulation: SGS authoritative testing, wall (100mm) sound insulation can reach 42dB.
8. Energy saving: The wall insulation effect is 3 times that of the brick wall, and the energy saving of air conditioning and heating equipment is 60%.

Installation Of Sandwich Panel 

1. Grass-roots cleaning
Clean up the grassroots that needs to be constructed, and the mortar or concrete protruding from the wall must be cleaned with tools to facilitate the construction of the next sandwich wall panel.

2, Elastic line bin
Perform the elastic line operation on the ground and the appropriate position of the wall surface to ensure that the installed sandwich wall panel can be horizontal and vertical. Position and grade the edges of the partition wall and the edges of the doors and windows, and then select the plates with the same specifications according to the dividing lines.

3.Sizing preparation
Cut the sandwich wall panel as needed, pay attention to adjust the width and length of the sandwich wall panel to minimize unnecessary losses. Then mix cement and medium sand in a ratio of 1: 2, and then add building glue to prepare a paste. When sizing, first use the water to paint the uneven grooves of the partition board, and then apply the polymer mortar to the uneven grooves of the partition board and the baseline of the floor.

4.Install wall panels
Move the sandwich wall panel to the position where it needs to be installed, stand it up, and align it up and down with the baseline. Use a shovel to pry the partition board from the bottom of it, and then press the board firmly against the board. , Make the mortar overflow from the joint, and then temporarily fix it with a wooden wedge, check the flatness and verticality of the partition wall board. After the inspection is completed, the connecting part between the wall panel and the wall panel needs to be fixed with a special steel bar at an angle of 45 downwards.

5. Grouting construction
After the sandwich wall panel is installed and calibrated, it is filled with cement mortar with a mix ratio of 1: 2 and the building glue is blended. The upper and lower gaps of the wall board and the joints between the boards must be used as much as possible mortar to fill. In the process of grouting, if you want to bury a concealed pipeline or a switch box in the wall, you can use mortar to fill it after the installation is complete.

6, Finishing
If you want to install a door frame on a lightweight partition wall, you can use a splint to cover the door directly on the wall panel, fix it with iron nails, and then use a decorative panel for the cover. Finally, the surface of the partition wall is coated with paint. You can also choose to paste your favorite porcelain to achieve certain aesthetic requirements.


 

Contact Information
Freda Lin
Xiamen ZhongJingTai Building Materials Co,. Ltd
Website: http://zjteps.en.made-in-china.com