Shockproof And Waterproof Lightweight eps cement sandwich panels
Surface: Fibre reinforced calcium silicon board or cement calcium board
Core: cement, EPS, sand and fly ash.
Items: Length: 2270mm/2440mm
Remark:products can be customerized
10 advantages compared with traditional panels
|2||lightweight economic||The volume-weight only 750-800kg/m3 , the weight of 75mm thickness ZJT board is 60kg/m2, equal to 1/6 of brick weight, 1/7 of 120mm thickness masonry.|
|3||increase valid space||the thickness of ZJT wall decreases 85mm by using 75mm thickness ZJT boards. Thus, valid space increases 1/m2 per 11.8mm. in other words, it can increase 6/m2 per 100/m2 .|
|4||moistureproof waterproof||will keep dry and leave no stains. During humid days, the boards will not condense water either. suitable to be installed in such wet areas as kitchens, bath rooms, basements because of its moistureproof and waterproof.|
|5||fireproof||Fireproof limit of ZJT boards is more than 4 hours and does not emit toxic gases under 1000 degree. The nonflammable performance reaches national A-class standard.|
|6||heat insulation||ZJT board is composed of special material to keep heat and thermal within a favorable condition. At same time, the ZJT boards are able to adjust moisture automatically and keep moisture at a balance level.|
|7||sound insulation||The raw materials of ZJT boards have good performance in sound insulation. ZJT board with 90mm thickness gains sound insulation of 42dB.|
|8||walls can be nailed and grooved||ZJT board can be grooved to have conductor arrangement or nailed to hang heavy object. The surface of ZJT board is smooth enough to make finisher processing directly with tile, wall trim and so on.|
|9||good integration||By using steels at the joints, the strength of walls is high enough to do partition in large story height and long span structures and it anti-seismic performance is several times higher than masonry.|
|10||easy and fast construction||It can be cut to adjust length and width at will. The process of installation is easy and fast, without the need of plastering.|
(1)interior wall partition
(2)prefabricated house,temporary building,modern building.
(4)exterior wall Installation
1, setting the line and carrying the board in position: Eject double lines of board thickness up and down the axes of installed wall board, easily carry to the side of wall according to the specification needed.
2, Sawing board: Using hand- hold electric saw to cut freely according to the wall specification.
3, Sizing cement on tenon side of two boards, then spread polymer mortar on one tenon side casually.
4, Installation: Carrying the board prepared to be installed to the installation place, correcting the wall board by gave lock and making it close tightly, and let the polymer mortar squeeze out into full and fixing it with a chock temporarily.
5, Correcting, fixing: Using a guiding rule of two meters or longer to check vertically and leveling correction, then using 6mm or 8mm reinforcing steel bar with ribs adding with construction sealant to fix.
6, Grouting and filling starch: Filling and stickling the corrected wall board with polymer mortar, filling the big gap with pea gravel concrete.
7, Sticking anti-cracking cloth: After the polymer (for filling the gaps) and wall are all shaped, sticking glass-cloth with emulsion on all seaming.
8, Installing electrical wires and switches: Setting lines on the places needing to be set with concealed wire and switch box, then cut a groove by hand-hold electric saw, filling with polymer mortar after installation.
9, Facing coating and wall papers: Scraping putty directly without plastering on the installed wall, then brushing coating and sticking wall paper.
10, Installing door case: Preparing a door and window hole on the installed wall, anchoring by splint or lines.
11, Facing ceramic tile, decorative sheet: Sticking ceramic tiles or other wood facing panels casually without plastering on installed wall.
12, Electric apparatus installation: Install lights, furniture, air-conditioners casually on installed room, nailed or hanged.
Notes: 1-6 is about panel installation, 7-12 is about follow-up construction of other projects.
Installation video →_→( click the website link)
http://v.youku.com/v_show/id_XODE2MTQ4NDg4.htmlOur Certificate company information
Xiamen ZhongJingtai building materials Co., Ltd, a comprehensive enterprise, specializes in developing and producing the new energy-saving wall materials. Located in the beautiful city, Xiamen, ZJT has modern working environment and production base. The factory is located in Quanzhou and its annual production capacity is more than two hundred million square meters.
The energy-saving sandwich wall panels are our main product, which has many advantages compared with traditional wall panels, including lightweight, solid core, thin body, high strength, shock resistance, heat insulation, sound insulation, fireproofing, waterproofing and easy installation. This not only conforms to modern construction requirement but also meets the country environmental-friendly building policy.
We adhere to the "quality first, win-win cooperation" business philosophy. We can design the sandwich wall panels according to your special request. Welcome to visit our factory and become our clients some day!
Contact InformationContact Person:Vivian Bao