| Customization: | Available |
|---|---|
| After-sales Service: | 5 Years |
| Warranty: | 5 Years |
|
Still deciding? Get samples of US$ 0/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
EPS Cement Sandwich Panels Introduction
ZJT EPS Cement Sandwich Panel is a kind of lightweight energy saving wall material, which uses cement calcium silicate or reinforced calcium silicate board as face panel, filled with cement, Expanded Polystyrene (EPS) foam particles, and as core material and forming by one time compound.
Product Composition
Surface : 5mm Calcium silicate board
Interior filling materials: EPS / cement / fly ash / sand / additive
EPS Cement Sandwich Panels Advantages
Energy-saving, environment-friendly
Green and environment-friendly, non-harmful substance, no radiation, reusable, no construction waste, widely used in various places.
Fireproof
The non-inflammability of the Ojunda board can be reached national A level standard. Under the high temperature of 1000 degrees, the fireproof feature can last four hours, do not radiate toxic gasses.
Increased the usable area
The thickness of the board is between 50mm-200mm. It largely saves the construction space compared with the traditional block.
Anti-pressure, anti-quake and anti-impact
Because of fabricated construction, 3-in-1 structure and using tongue and groove to join panels, the anti-pressure, anti-quake and anti-impact all meet the national standard.
Waterproof and wetproof
The water container is made of Ojunda material without any waterproof plaster with no leakage at all. The tests show that the material has good waterproofness and dampproof. Ojunda material can be used in the wet area such as kitchen, toilet, and basement.
Sound insulation
Good sound insulation, sound absorption and noise reduction functions. For example, the amount of sound insulation is up to 40dB with the 90mm thickness of the wall board, which is 2 or 3 times than the traditional wall.
Simple construction, high efficiency
The wall material is completely dry work, fabricated construction. The materials can be arbitrary cut according to specification. During the construction of transportation concise, pile up, no need of mortal health file, greatly reduction the time duration, and the calibration material, reducing the low construction waste. Easily transported, clearly stack and no mortar batch file largely shorten the construction period. Besides, the construction waste can be reduced by the lowly loss rate.
Heat preservation
Wall materials mainly are made from environmental protection and energy saving heat insulation material. With a good heat insulation and preservation function, it can keep the indoor temperature at a stable range and make the environment much more comfortable.
Spiking and stickability
The wall material board can be nailed directly or install expansion bolt to hang heavy loads. The single point of hanging strength is above 45kg. The surface of the board can be covered by ceramic tile, wall paper, wood panel and other materials due to the smooth and ash-free features.
Lightweight and economy
The core material of wall board is filled with lightweight EPS. The volume-weight is about 600-800 kg/m3. Freely plastering and the weight is only 1/6 of the traditional wall.
Reusable and user-friendly
The wall board can be reused in the movable interior wall such as supermarket, office, etc. The lightweight energy-saving wall board can be reusable. Dismounting and installation are simple and improved usage rate and economy saving. Also it has no construction waste and no affect other people's normal work.
Product Application
widely used:
1. residential building,school,hospital,prefab house,office,
hotel,public construction,entertainment place.
2. wall/exterior wall/interior wall/super high wall/abnormity wall,
roof,floor,pipe,fire well,equipment partiton
Product Parameter
Product Specification
| Length | Width | Thickness |
| 2270mm 2440mm |
610mm |
60mm |
| 75mm | ||
| 90mm | ||
| 100mm | ||
| 120mm | ||
| 150mm |
Technical Index
| Item | Testing Indexes | |||||
| Model (Thinkness/mm) | 60mm | 75mm | 90mm | 120mm | 150mm | |
| 1 | Anti-impact Capacity [Standard sandbags/times] |
≥5 | ≥5 | ≥5 | ≥5 | ≥5 |
| 2 | Anti-bending Damage Load [times over deadweight] |
≥3.0 | ≥3.0 | ≥3.0 | ≥5.0 | ≥5.0 |
| 3 | Compressive Stregth [Mpa] | ≥3.5 | ≥3.5 | ≥3.5 | ≥3.5 | ≥3.5 |
| 4 | Softening Coefficient | ≥0.8 | ≥0.8 | ≥0.8 | ≥0.8 | ≥0.8 |
| 5 | Surface Density [kg/] | ≤70 | ≤70 | ≤90 | ≤110 | ≤110 |
| 6 | Moisture Rate [%] | ≤10 | ≤10 | ≤10 | ≤8 | ≤8 |
| 7 | Drying Shrinkage Value [mm/m] | ≤0.5 | ≤0.5 | ≤0.5 | ≤0.5 | ≤0.5 |
| 8 | Hang Force [N] | ≥1000 | ≥1000 | ≥1000 | ≥1000 | ≥1000 |
| 9 | Sound Insulation Capacity In the Air[dB] | ≥35 | ≥35 | ≥40 | ≥45 | ≥50 |
| 10 | Fire Endurance [H] | ≥1.5 | ≥1.5 | ≥2.5 | ≥3.0 | ≥4.5 |
| 11 | Heat Transfer Coefficient [W/m2.k] | ≤2.0 | ≤2.0 | ≤2.0 | ≤2.0 | ≤2.0 |
| 12 | Inner Radiation Index | ≤1 | ≤1 | ≤1 | ≤1 | ≤1 |
| 13 | Outer Radiation Index | ≤1 | ≤1 | ≤1 | ≤1 | ≤1 |
Loading Information
| Items(mm) | Single(piece) | Load by 20'GP | Load by 40'GP | ||||||
| m³ | Kg/pcs | Kg/m2 | Qty(pcs) | m2 | Tons | Qty(pcs) | m2 | Tons | |
| 2270×610×60 | 0.08 | 47 | 34 | 313 | 433 | 15 | 525 | 727 | 26 |
| 2270×610×75 | 0.10 | 67 | 48 | 252 | 349 | 17 | 364 | 504 | 26 |
| 2270×610×90 | 0.12 | 77 | 56 | 207 | 287 | 16 | 322 | 446 | 26 |
| 2270×610×100 | 0.14 | 87 | 63 | 189 | 262 | 18 | 280 | 388 | 26 |
| 2270×610×120 | 0.17 | 98 | 71 | 162 | 224 | 16 | 252 | 349 | 26 |
| 2270×610×150 | 0.21 | 147 | 106 | 126 | 174 | 18 | 147 | 204 | 26 |
| 2440×610×60 | 0.09 | 60 | 40 | 240 | 357 | 15 | 420 | 625 | 26 |
| 2440×610×75 | 0.11 | 80 | 54 | 204 | 304 | 17 | 308 | 458 | 26 |
| 2440×610×90 | 0.13 | 90 | 60 | 168 | 250 | 16 | 336 | 500 | 26 |
| 2440×610×100 | 0.15 | 100 | 67 | 144 | 214 | 15 | 240 | 357 | 26 |
| 2440×610×120 | 0.18 | 110 | 74 | 108 | 161 | 12 | 216 | 321 | 26 |
| 2440×610×150 | 0.22 | 160 | 107 | 78 | 116 | 16 | 156 | 232 | 26 |
How to install
About Us
In the trend of low-carbon and energy-saving in domestic, ZJT is on a mission environmental protection, and actively promoting the development and popularization of green building materials. The composition of the materials of ZJT energy-saving wall panel strictly implements national GB6566-2001Building Materials Radionuclide Limited standard, which belong to the main of the radioactive building materials and a kind of decoration materials, 100% do not contain harmful substances in humans, and in high temperature combustion state, the release of excessive part also can be operated in an efficient range so it has no direct threat to human.
Production area: 40,000m2
Stacking area: 60,000m2
Production capacity: 2,000,000m2 per year
Export quantity: over 600 containers per month
Customers' satisfication will be the best compliment for us!
Our capabilities speak for us!
You can always truth us!
FAQ
1. Q:How about your packing?
A:Free packing: we use normal pallet and packing belt for panels.
2. Q:How about your loading?
A:Our loading is normally 18 pallets per 20' container or according to clients' requirements.
3. Q:What is your MOQ?
A:A 20 feet container.
4. Q:How about your time of delivery?
A:It's about 15 days after receiving deposit.
5. Q:How can we get samples.
A:Our samples are free for your reference,you just need to pay for the freight.
6. Q:How about the payment terms?
A:30% T/T in advance T/T balance before delivery.
Contact Information
){kind=link}