Insulated Interior Wall Panel Building Wall Sandwich Panel Houses

• Customization: Available
• Application: Interior Wall/Exterior Wall/Floor/Roof
• Feature: Lightweight/Fireproof/Sound Insulation
• Material: Container
• Thickness: 60/75/90/100/120/150mm
• Core Materials: EPS, Cement and Fly Ash
• Face Panel: 5mm Calcium Silicate Board
• Fireproof: 3 Hours
• Sound Insulation: 42dB
• Compressive Strength: >=3.5MPa
• Hang Force: >=1000n
• Moisture Rate: <=10%
• Heat Transfer Coefficient: <=2.0W/M2.K
• Drying Shrinkage Value: <=0.5mm/M
• Environment Friendly: 100% No Asbestos, No Harmless to Healthy
• Life Span: 70 Years
• Weight: 100mm Is 66kg/M2
• Usage: Warehouse, Villa, Dormitories, Temporary Offices, Workshop
• Certification: ISO, CE, SGS, TUV
• Customized: Customized
• Transport Package: Pallet+Pearl Wool+Corner Paper+Belt+Plast
• Specification: 2270/2440*610MM
• Trademark: ZJT
• Origin: Xiamen, China

Product Description

Insulated interior wall panel  building wall  sandwich panel houses

Product introduce

The composite wallboard is mainly made of special cement as gel raw material and mechanical pressing after adding a large amount of fly ash. The composite wallboard is different from the traditional building material, it has the advantages of environmental protection, small pollution, light weight, heat preservation and sound insulation, etc. The plate made can be assembled at will, and it is a kind of multifunctional wall material.


Product feature

1.Hightweight the economic benefits,reduce project cost.
The light energy-saving composite wall plate is made of industrial residue fly ash, calcium silicate panel, ceramsite, silicate cement and EPS foam particles as main raw materials, the production process is simple, the cost is low, and the economic benefit is considerable.

2.Advanced technology level.
The industrialization of housing construction in this century has become irreversible. According to the analysis of the development of wall materials in developed countries, the product is in accordance with the development law, which overcomes the defects of other light wall panels and has unique performance, and will be the leader of the new wall material.

3.Lightweight,optimize structures.
 A.Traditional brick block, the wall must be located in the vertical position on the beam to adopt.
 B.Zhongjingtai wall material, which can widen the distance between beams and columns, highlight the economic benefit of mining Jingtai wall material.

 C.The wall can not be restricted by beam and column.

4.Sound insulation.
ZJT lightweight sandwich panels have good sound insulation,it is 40dB for 90mm thick wall and much better for thicker panels,the sound effects in the line with national residential sound requirements,much higher than other excuses brick wall of sound effects.

5.Waterproof.
The light partition board can be filled with cement to form a pool body without making any waterproof decoration. The back of the light partition panel can persist in dryness, leave no trace, and will not show condensed water droplets in a humid climate. Light partition panel is a professional waterproof board, with good waterproof, moisture-proof performance, can be applied to kitchen, cleaning room, basement and other wet areas.

6.Easy to construct,transport and tim esaving.
Brick masonry construction capacity of 12 individuals for eight hours a day,if use ZJT wall panel in construction,three people could complete in 60 minutes,so efficiency advantage is very significant.

Product specification
 

Product name	Lightweight eps cement sandwich wall panel
Length*Width(mm)	2270/2440*610
Thickness(mm)	60	75	90	100	120	150
Application	roof	interior wall			exterior wall or floor

Product application






Packing and shipping

1.Free packing (with normal pallet and packing belt) 2.Standard exporting packing (wrapped with plastic thin film,edge protect and good pallet): USD20-30/Package 3.Packing size: 1500-3000*610*1000mm Loading: 18 pallets per 20' container, 11000kgs-18000kgs per 20' container



About us

ZJT Company

XIAMEN ZHONGJINGTAI BUILDING MATERIALS CO., LTD. is a professional high-tech research and development company producing new wall materials,
machinery and equipment development, technology production and promotion of product applications. The company is situated in the charming Xiamen city,
with the convenience of water and land transportation and only ten minutes from the airport.
We adhere to the "quality first, win-win cooperation" business philosophy and provide our value customers with strong technical support and package services.
With our top quality products and credibility, we pledge to collaborate with our partners to thrive together while meeting the demands of the market.
We are committed to contribute these superior and environmentally-friendly wall materials to the society. 



Contact us



Xiamen Zhongjingtai Building Materials Co., Ltd 
Unit2A, Lianchang Building, No6-8 Huli District, Xiamen, China
Contact person:Jodie Huang