Non-Asbestos Fiber Cement Board Structural Insulated Precast Concrete Panel for Apartment Construction

• Customization: Available
• After-sales Service: 5years
• Warranty: 5years
• Model NO.: ZJT-F
• Feature: Environmental, Fireproof, Light Weight
• Fire Rating: 1
• Certification: ISO9001
• Customized: Non-Customized
• Panel Material: Nonmetal
• Size: 60/75/80/90/100/120/150/180mm
• Width: 610mm
• Length: 2270mm-3000mm
• Board: Calcium Silicon Board / Fibre Cement Board
• Main Features: Fireproof, Waterproof, Soundproof
• Sound Insulation: 32~56 dB
• Heat Insulation: 4 Hours Under 1000 Celsius Degree
• Thermal Conductivity: 0.221W/Mk
• Moisture Movement: 0.06%
• Transport Package: Plastic Thin Film, Edge Protect and Good Pallet
• Specification: CE, SGS, ISO
• Trademark: ZJT
• Origin: Fujian, China
• HS Code: 6810999000
• Production Capacity: 200000 Square Meters/Month
• Package Size: 10.00cm * 10.00cm * 10.00cm
• Package Gross Weight: 1.000kg

Product Description

Non-Asbestos Fiber Cement Board Structural Insulated  Precast Concrete Panel for Apartment Construction 
 

Product Description

Information of Structural Insulated Panels

Sandwich wall panel is a new type of energy-saving wall material. It is a wall material with the same appearance as a hollow floor slab, but it has male and female grooving grooves on both sides. When installing, you only need to stand up the board. Apply a small amount of cement mortar and then install.Sandwich wall panel has the advantages of light weight, high strength, multiple environmental protection, thermal insulation, sound insulation, fire prevention, rapid construction, reduced wall costs, etc .; its weight is only 1/8 of a solid brick wall. The thermal conductivity is only 1/3 of the solid brick wall, the acoustic wave conductivity is only 1/4 of the solid brick wall, saving wall cost by 15-20%, and the construction efficiency is improved by 3-5 times. In addition, it has outstanding environmental protection significance.

 

Product Parameters

 

Features of Structural Insulated Panels

1. This construction technology is fixed with steel nails, polymer cement mortar is used as the joint material, and the joints are cracked with anti-cracking glue and crack-resistant fiber cloth is attached to prevent cracking.
2. The wall is not easy to crack, which eliminates the common quality problems of GRC wall panel cracking.
3. Convenient and fast construction, easy operation and high work efficiency.
4. The main structure can be installed at the same time, which can shorten the construction period and reduce the construction cost.
5. It can reduce the wet work on site, eliminate the plastering process, reduce the labor intensity of workers, and reduce the construction cost.
6. Can increase the area of buildings.
7. The wall material is green and environmentally friendly, the technology is advanced and reliable, and the quality is stable.

Projects

Applicaiton of Structural Insulated Panels

1. Partition, indoor wall, outdoor wall of non load bearing wall
2. The renovation of the old buildings
3. Other condition which have strong requirements of the moisture proof, waterproof, fireproof, sound insulation.

Length  (mm)	Width  (mm)	Thickness  (mm)	Density  (kg/m2)	Application	Appearance
2270   2440	610	60	38±2%	Non-load bearing wall  of houses and buildings	With calcium silicate  board as face board,  Solid core
		75	47±2%
		90	56±2%
		100	65±2%
		120	74±2%
		150	93±2%

Installation Instructions

 

1.Grass-roots cleaning
Clean up the grassroots that needs to be constructed, and the mortar or concrete protruding from the wall must be cleaned with tools to facilitate the construction of the next sandwich wall panel.
2. Elastic line bin
Perform the elastic line operation on the ground and the appropriate position of the wall surface to ensure that the installed sandwich wall panel can be horizontal and vertical. Position and grade the edges of the partition wall and the edges of the doors and windows, and then select the plates with the same specifications according to the dividing lines.
3.Sizing preparation
Cut the sandwich wall panel as needed, pay attention to adjust the width and length of the sandwich wall panel to minimize unnecessary losses. Then mix cement and medium sand in a ratio of 1: 2, and then add building glue to prepare a paste. When sizing, first use the water to paint the uneven grooves of the partition board, and then apply the polymer mortar to the uneven grooves of the partition board and the baseline of the floor.
4.Install wall panels
Move the sandwich wall panel to the position where it needs to be installed, stand it up, and align it up and down with the baseline. Use a shovel to pry the partition board from the bottom of it, and then press the board firmly against the board. , Make the mortar overflow from the joint, and then temporarily fix it with a wooden wedge, check the flatness and verticality of the partition wall board. After the inspection is completed, the connecting part between the wall panel and the wall panel needs to be fixed with a special steel bar at an angle of 45 downwards.
5. Grouting construction
After the sandwich wall panel is installed and calibrated, it is filled with cement mortar with a mix ratio of 1: 2 and the building glue is blended. The upper and lower gaps of the wall board and the joints between the boards must be used as much as possible mortar to fill. In the process of grouting, if you want to bury a concealed pipeline or a switch box in the wall, you can use mortar to fill it after the installation is complete.
6.Finishing
If you want to install a door frame on a lightweight partition wall, you can use a splint to cover the door directly on the wall panel, fix it with iron nails, and then use a decorative panel for the cover. Finally, the surface of the partition wall is coated with paint. You can also choose to paste your favorite porcelain to achieve certain aesthetic requirements.

Contact Info

 

Contact Information
 Freda Lin