Anti-Earthquake Anti-Aging Green Sandwich Wall Panel
Composition
Surface :fiber cement board/calcium silicate board
Interior filling materials: EPS / cement / fly ash / sand / additive
Technical performance indicates
| eItem |
size |
2270*610/2240*610 |
| thickness |
60mm |
75mm |
90mm |
100mm |
120mm |
150mm |
| Surface density |
kg/m2 |
≤70 |
≤70 |
≤90 |
≤110 |
≤110 |
≤110 |
| Moisture rate |
% |
≤10 |
≤10 |
≤10 |
≤8 |
≤8 |
≤8 |
| Sound insulation |
dB |
≥35 |
≥35 |
≥40 |
≥42 |
≥45 |
≥50 |
| Fireproof |
H |
≥1.5 |
≥1.5 |
≥2.5 |
≥3.0 |
≥3.0 |
≥4.5 |
The combustion properties of (AIorA2)
|
A1orA2 |
Advantages
The products has the advantage of Solid, Lightweight, Thin, Better Strenth, Impact Resistance, Hanging Strenth, Heat Insulation,Sound Insulation, Easy Cutting, Pet and Rot Resistance, Fireproof, Waterproof, Fast construction,Easy installation Increasing usable Space.
It can be arbitrarily slotted, without batch file, dry operation, environmental protection, which achieve energy
conservation and energy efficient. At the same time, it reduces the total area to be ocupied by the wall and to raise
residential practical area, alleviates the structure load, improves the building aseismatic capacity and safety performance, and reduce total cost.This production technology and application are the reform of the world materail, and a new breakthrough
in our country
How to install
- Set line: set line and carry panel in position.
- Saw panel: use hand-hold eletrict saw to cut freely.
- Sizing: sizing cement on tenon side of two panels then spread ploymer mortar on one tenon.
- Installation: carry panel prepared to be installed panel.
- Plant bar in wall and pillar:dry one hold in the original pillar or wall and fix panel by one steel bar.
- Corret and fix: use one guiding ruler to check and level correction.
- Plant bar in structure beam:drill one hole in structure beam and plant one reversed 7 type shaped steel bar to fix with wall panel.
- Plant bar in floor: dirll one hole in floor and panlt 7 types shaped steel bar to fix with wall panel.
- Plant bar between wall panel: plant one 200mm length steel bar in the angle or 45 degree to fix between two panels.
- Install electric wire and switch: set lines on the place required to be settled with concealed wire and switch box.
- Grout and fill slurry: fill and handle corrected wall panel with ploymer mortar.
- Scrapping ash and sticking anti-crack cloth, coating:stick anti-crack cloth and brush coating after grouting slurry.
Application
1. Floor System
Itcan be innovatively used as floor board.Besides the basic characteristics like sound insulation,waterproof,dampproof,this system has the outstanding advantages such as hight load-bearing capacity, antistatic electricity, friction resistance, high strength, convenient for wire groove and water pipe inbuilt, corrosion resistance,no deformation,no split,etc.,which is much suitable for the fields including the floor plate of additional top floor, factory,workshop,warehouse,etc.
2. Exterior Wall
Itcan automatically adjust indoor air and water content with the season and climate changes, which can keep the temperature at an invariable temperature level ,and such ecology effect just goes with the tide of modern residential building. It is widely applied to various modular house ,low buildings, apartment, villas,and city house
3. Interior Partition System
With excellent fireproof, best hanging force, sound insulation, heat insulation, waterproof,
easy Installation and the like characteristics, light weight compound sandwich board have been widely applying to the special positions like partition panel of high-rise and mega-high-rise buildings.
4.Roof System
This system not only solves the problem of roof leakage,but also has the advantages such as heat insulation, neat joint surface, high temperature resistance, etc.The features of light weight and hight strength reduce the use of roof beamcolumn,reduce the consumption of materials,improve security;its easy construction time,which bring out its hight integrated performance-price ratio.
*All kinds of new and old building construction of indoor and outdoor decoratio
*Indoor and outdoor decoration of office buildings, hospitals, shops, restaurants, bars and other public buildings;
*Interior and exterior wall decoration of family homes, luxury apartments, villas etc; *Particularly suitable for high-rise building exterior wall insulation decoration.
){kind=link}
){kind=link}