Waterproof Wind-Proof EPS Sandwich Panel for Apartment Block/Hotel/Resort/Inn

• Customization: Available
• After-sales Service: 5years
• Application: Exterior Wall Of Building, Roof, Wall Panel, Wall, Floor, Roof and Prefab Building etc.
• Model NO.: ZJT-F
• Feature: Environmental, Fireproof, Light Weight
• Thickness: 100mm, 120mm, 150mm, 200mm, 75mm
• Advantage: Waterproof, Fireproof and Eco-Friendly etc
• Use Life: 70years
• Compressive Strength: 3.5MPa
• Hanging Force: 1000n
• Sample Available: Yes
• Export Markets: Global
• Sound Insulation: >42dB
• Production Time: 10days
• Roofing: 60/75mm
• Flooring: 100/120mm
• Apartment: 100mm
• Fire Rating: 4
• Certification: ISO9001
• Transport Package: Pallet+Pearl Wool+Corner Paper+Belt+Plast
• Specification: ISO, CE, SGS
• Trademark: ZJT
• Origin: Fujian, China
• HS Code: 6810919000
• Production Capacity: 100000 Sqm Per Month
• Package Size: 244.00cm * 122.00cm * 110.00cm
• Package Gross Weight: 1200.000kg

Product Description

Waterproof Wind-Proof EPS Sandwich Panel for Apartment block/Hotel/Resort/Inn

Product Description

Information of Interior Partition Walls

EPS Cement Sandwich Panel is made from both surfaces with 100% Non-Asbestos Calcium Silicate Boards( Siliceous and Calcium , such as sand, fly ash, lime, calcium carbide sludge and cement) the core of natural sand, foam particle, light weight port-land cement and many additives etc.

 

Technical information		Parameter Index Specifications
		60mm	75mm	90mm	100mm	120mm	150mm
1	Anti-impact capacity/times	≥5	≥5	≥5	≥5	≥5	≥5
2	Anti-bending damage load/times over deadweight	≥3.0	≥3.0	≥3.0	≥3.0	≥5.0	≥5.0
3	Compressive strength/Mpa	≥3.5	≥3.5	≥3.5	≥3.5	≥3.5	≥3.5
4	Softening coefficient	≥0.8	≥0.8	≥0.8	≥0.8	≥0.8	≥0.8
5	Surface density(kg/m2)	≤70	≤70	≤90	≤90	≤110	≤110
6	Moisture rate(%)	≤10	≤10	≤10	≤10	≤8	≤8
7	Dring shrinkage value(mm/m)	≤0.5	≤0.5	≤0.5	≤0.5	≤0.5	≤0.5
8	Hang force(N)	≥1000	≥1000	≥1000	≥1000	≥1000	≥1000
9	Sound insulation capacity in the air(dB)	≥35	≥35	≥40	≥40	≥45	≥50
10	Fire endurance(h)	≥1.5	≥1.5	≥2.5	≥2.5	≥3.0	≥4.5
11	Heat transfer coefficient(w/m2.k)	≤2.0	≤2.0	≤2.0	≤2.0	≤2.0	≤2.0
12	Inner radiation index	≤1	≤1	≤1	≤1	≤1	≤1
13	Outer radiation index	≤1	≤1	≤1	≤1	≤1	≤1
14	Frost resistance(shall show no visible cracks and surface without change)	_	_	shall show no visible cracks and surface without change
15	The combustion properties(A1 or A2)	_	_	A1 or A2

 

Application

Application of Interior Partition Walls

1). Interior partition (60mm,75mm or 90mm is your best choice)
2). Exterior Wall (120mm, 150mm, 180mm for your reference)
3). Floor and roof
4). Prefabricated houses
5). Modern high-rise Building
6). Schools, Hotels, office
7). Indoor space of ecological residences
8). All kinds of houses and structures

Installation Instructions

1. Setting the line and carrying the board into position.

2. Using a hand-hold electric saw cut to the sizes needed.
3. Sizing cement on tenon side of two boards, then spread specific mortar on one tenon side casually.
4. Carrying the board prepared to be installed to the installation place, correcting the wall board by
special tools, and making it close tightly. Then let the specific mortar squeeze out into full and then fixing it
with a wedge temporarily.
5. Planting bars in wall and pillar: drill a hole in the original pillar or wall, and fix the board by steel bars
6. Correcting and fixing: Using a guiding rule to check the vertical and leveling correction.
7.Planting bars in structure beam: drill a hole in structure beam and plant a reversed 7-shaped steel bar to fix with wall board.
8. Planting bars in floor: drill a hole in the floor and plant a 7-shaped steel bar to fix with wall board.
9. Planting bars between two boards, plant a steel bar in the angle of 45 degree to fix.
10. Installing electrical wires and switches: setting lines on the places needing to be set with concealed
wire and switch box.
11. Grouting and filling starch: filling and sticking the corrected wall board with polymer mortar.
12. Sticking anti-cracking tape.
After the mortar and wall are all shaped, sticking glass-cloth or anti-cracking tape, brushing coating.

 

Packaging & Shipping

Delivery and Shipping of Interior Partition Walls

1). Free packing, normal pallet + packing belt
2). Standard exporting packing, good pallet+pearl wool+corner protective paper+packing belt+plastic thin film
3). Loading: Normally 24 pallets per 40' container or according to clients' requirements

Specification	.Length:2270mm,2440mm .Width:610mm .Thickness:60,75,90,100,120,150mm
packing	Free packing,normal pallet+packing belt Standard exporting packing,good pallet+pearl wool+corner protective paper+packing belt+plastic thin film. 3.packing size:2270*610*1000mm,2440*610*1000mm 4.Loading:18 pallets per 20' container for 2270mm boards. 14pallets per per 20' container for 2440mm boards.
MOQ	One 20' container 1.2270*610*60mm boards:360pcs(498) 2.2270*610*75mm boards:252pcs(349) 3.2270*610*90mm boards:216pcs(299) 4.2270*610*100mm boards:180pcs(249) 5.2270*610*120mm boards:162pcs(224) 6.2270*610*150mm boards:126pcs(174)

Contact us!
Freda Lin
Xiamen ZhongJingTai Building Materials Co,. Ltd
Facebook: Freda Lin