| After-sales Service: | 5 Years |
|---|---|
| Warranty: | 5 Years |
| Color: | Opal White |
| Samples: |
grey 2pcs
|
|---|
| Customization: |
|---|
|
Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
|---|
| Payment Method: |
|
|---|---|
| Initial Payment Full Payment |
| Currency: | US$ |
|---|
| Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
|---|
Suppliers with verified business licenses
Audited Supplier 
EPS Wall Sandwich Wall Panels provide superior strength and durability. They are designed to withstand extreme temperatures and are resistant to impact, making them a great choice for areas prone to natural disasters. Additionally, they are designed to be resistant to water, making them suitable for wet environments.
The panels are also designed to be lightweight and easy to install. This makes them a great choice for any construction project, as they can be quickly and easily installed with minimal disruption. Additionally, they are designed to be fire-resistant, making them a great choice for fire-rated structures
Cement board (face panel) + Cement and EPS (core) + cement board (face panel)
Application
Interior and exterior partition on steel or concrete structure building, for new construction,
additions or renovations.
It can widely be applied to wall materials of various high and low buildings such as: bank, office
building, hospital,
school, hotel, shopping mall, amusement hall, old house reconstruction, residence and workshop.
Advantages
1. Environmental Protection
2. Fireproofing
3. Increasing usable floor area
4. Anti-seismic Good Integrity
5. Damp Proof,Waterproof
6. Sound insulation
7. Contraction simple, Efficient, Fast
8. Heat insulation, Heat preservation
9. Opening slot, Wiring, Hanging
10. Light, Economic
Size
| Size(length*width*thickness) | Weight(kg/M2) | Application | Packing(pcs/per 20'GP) | Apperance |
| 2440/2270x610x60mm | 45-48 | Roof | 315pcs/436m2 | Solid core |
| 2440/2270x610x75mm | 50-53 | Interior wall | 252pcs/349m2 | 100% non-asbestos |
| 2440/2270x610x90mm | 55-58 | interior/Exterior wall | 207pcs/287m2 | waterproof |
| 2440/2270x610x100mm | 60-65 | interior/exterior wall | 189pcs/262m2 | fireproof |
| 2440/2270x610x120mm | 65-70 | exterior wall/Floor | 153pcs/m2 | High strength |
| 2440/2270x610x150mm | 80-90 | exterior wall | 126pcs/m2 |
Technical Index
| Item | Testing Indexes | |||||
| Thinkness[mm] | 60 | 75 | 90 | 120 | 150 | 180 |
| Anti-impact Capacity/Items [standard sandbags/times] |
≥5 | ≥5 | ≥5 | ≥5 | ≥5 | ≥5 |
| Anti-bending Damage Load [times over deadweight] |
≥3.0 | ≥3.0 | ≥3.0 | ≥5.0 | ≥5.0 | ≥7.0 |
| Compressive Stregth [Mpa] | ≥3.5 | ≥3.5 | ≥3.5 | ≥3.5 | ≥3.5 | ≥3.5 |
| Softening Coefficient | ≥0.8 | ≥0.8 | ≥0.8 | ≥0.8 | ≥0.8 | ≥0.8 |
| Surface Density [kg/m2] | ≤70 | ≤70 | ≤90 | ≤110 | ≤110 | ≤130 |
| Moisture Rate [%] | ≤10 | ≤10 | ≤10 | ≤8 | ≤8 | ≤8 |
| Drying Shrinkage Value [mm/m] | ≤0.5 | ≤0.5 | ≤0.5 | ≤0.5 | ≤0.5 | ≤0.5 |
| Hang Force [N] | ≥1000 | ≥1000 | ≥1000 | ≥1000 | ≥1000 | ≥1000 |
| Sound Insulation Capacity In The Air [dB] | ≥35 | ≥35 | ≥40 | ≥45 | ≥50 | ≥55 |
| Fire Endurance [H] | ≥1.5 | ≥1.5 | ≥2.5 | ≥3.0 | ≥4.5 | ≥6.5 |
| Heat Transfer Coefficient [W/m2.k] | ≤2.0 | ≤2.0 | ≤2.0 | ≤2.0 | ≤2.0 | ≤2.0 |
| Inner Radiation Index | ≤1 | ≤1 | ≤1 | ≤1 | ≤1 | ≤1 |
| Outer Radiation Index | ≤1 | ≤1 | ≤1 | ≤1 | ≤1 | ≤1 |
Installation Steps:
1. Setting the line and carrying the board into position
2. Using hand-hold electric saw freely according to the specification of wall,
3. Sizing the bump slot and then spread the baseline and the bump slots with the ZJT special adhesives
4. Carrying the board prepared to be installed to the installation place, correcting the wall board by Special tools, and making it close tightly, and let the polymer mortar squeeze out into full and then fixing it with a wedge temporarily
5. Correcting, fixing Using a guiding rule of two meters to check the vertical and leveling correction. Then using 6mm or 8mm reinforcing steel bar and ribs adding with construction sealant to fix.
6. Grooving and piping Cutting a groove by a hand-hold electric saw for burying the concealed wire and switch box.Then filling with polymer mortar after installation.
7. Sticking anti-cracking tape
8. Installing doorcase
9. Facing ceramic tile, decorative sheet, coating and wall paper sticking ceramic tiles,or wood facing panels and coating directly on the installed wall without plastering.
FAQ:
Q1: Why should I choose ZJT panel?
A: We are a professional EPS cement sandwich panel manufacturer in China.
We have professional work team, can provide you top quality products and excellent services.
Q2: What is your approximately export amount every month?
A: Loading & shipping about 50 40GP containers per month
Q3: What is your main market?
A: Our EPS cement sandwich panels are desired all over the world, and the main market is Asia,Africa, Middle East, South America, and developing countries.
Q4: How can I get samples for testing?
A: We will send you free samples, if you have DHL, UPS or Fedex account, that will be the best,if have not, you can transfer the shipping cost to us, we will send the samples to you by our shipping account.
Q5: What is your delivery time?
Normally, within 15 days. If we have the needed product in stock, can be shipped within 7 days.For bulk order, delivery time depends on the quantity.
Q6: Do you have any certificates or qualifications?
A: Yes. We have passed CE&ISO9001. Also, we have done fireproof test, the fireproof performance of our sandwich panel is more than 4 hours.
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}