Single Slope Roof Sandwich Panel Prefab House

• Customization: Available
• Feature: Environmental, Fireproof, Light Weight
• Fire Rating: 3
• Model NO.: ZJT-AB92
• Certification: ROHS, ISO9001, SGS TUV
• Customized: Customized
• Length: 2270/2440mm
• Width: 610mm
• Thickness: 60/75/90/100/120/150/180mm
• Panel Material: Nonmetal
• Fireproof: 3 Hours
• Sound Insulation: >=42dB
• Cpmpressive Strength: >=3.5MPa
• Hang Force: >=1000n
• Heat Transfer Coefficient: <=2.0W/M2.K
• Environment Friendly: 100% Non Asbestos
• Moistureproof: General
• Piping: Grooved After Installation
• Environmental Evaluation: Clean
• Wall: Solid Core
• Method: Dry
• Transport Package: Pallet+Pearl Wool+Corner Paper+Belt+Plast
• Specification: EPS, Cement, Additives, Calcium Silicate Boards
• Trademark: ZJT
• Origin: Xiamen
• HS Code: 6810999000
• Production Capacity: 20000 Square Meters

Product Description

Single slope roof sandwich panel prefab house

Product profile

The composite wallboard is mainly made of special cement as gel raw material and mechanical pressing after adding a large amount of fly ash. The composite wallboard is different from the traditional building material, it has the advantages of environmental protection, small pollution, light weight, heat preservation and sound insulation, etc. The plate made can be assembled at will, and it is a kind of multifunctional wall material.




Face panel:5mm Calcium Silicate Boards

Interior Filling:EPS,Cement,Additives,Fly Ash

Product Specifications

Length:2270/2440mm  Width:610mm  Thickness:60/75/90/100/120/180mm
 

2270mm	2440mm	Application
2270*610*60mm	2440*610*60mm	Roof
2270*610*75mm	2440*610*75mm	Interior Wall
2270*610*90mm	2440*610*90mm	Interior Wall
2270*610*100mm	2440*610*100mm	Interior Wall
2270*610*120mm	2440*610*120mm	Exterior Wall/Floor
2270*610*150mm	2440*610*150mm	Exterior Wall/Floor

Product Features

01.Hightlight the economic benefits,reduce project cost.
ZJT sandwich panel could optimize beam structures,adjust building layout and improve application performance.It has following economic advantages:save living space,fast construction,low labour cost and 70% of panel could be recyled.

02.Lightweight,Optimize structures
ZJT lightweight energy-saving sandwich panel,the weight for thickness 75mm is about 60KG/m2,the average weight for the panel is 60-800kg/m3,while the brick is 360kg/m2,the Autoclaved Aerated Concrete is 120kg/m2.

03.Space saving increase living space.

04.Sound insulation.
ZJT lightweight sandwich panels have good sound insulation,it is 40dB for 90mm thick wall and much better for thicker panels,the sound effects in the line with national residential sound requirements,much higher than other excuses brick wall of sound effects.

05.Easy to construct,transport and time saving.
According to many groups construction sites data,brick masonry construction capacity of 12 individuals for eight hours a day,if use ZJT wall panel in construction,three people could complete in 60 minutes,so efficiency advantage is very significant.

06.Earthquake resistance and impact resistance.
ZJT building materials can resist 8 intensity earthquake,whose seismic performance is 1.5 times that of the traditional wall materials.

07.Strong hanging force,can be slotted wiring and buried pipe.
By hanging test,the single point hanging force of wall panel can be up to 50kg and above level,and fully meet the wall of the general bearing applications,such as the installation of air-conditioning,condole ark,water heater,fixed,marble mesa skeleton support and so on.

Product Applications

One.Interior Wall




Two.Exterior Wall



Three.Floor




Four.Roof



Five.Schllo,Hotel,KTV,Hospital,Villa,etc.



 Manner of packing 


1.Free packing (with normal pallet and packing belt)
2.Standard exporting packing (wrapped with plastic thin film,edge protect and good pallet): USD20-30/Package 3.Packing size: 1500-3000*610*1000mm Loading: 18 pallets per 20' container, 11000kgs-18000kgs per 20' container



About us


Xiamen ZhongJingtai building materials Co., Ltd, is a professional high-tech research and development company producing new wall materials, machinery and equipment development, technology production and promotion of product applications. The company is situated in the charming Xiamen city, with the convenience of water and land transportation and only ten minutes from the airport. We respond positively to the national policy on wall reforming. We have developed successfully wall panels that meet the energy saving needs of modern architecture. 




Product Certificate






We can provide samples free of charge. Please feel free to contact us.



Contact us



Xiamen Zhongjingtai Building Materials Co., Ltd 
Unit2A, Lianchang Building, No6-8 Huli District, Xiamen, China

Contact person:Jodie Huang  

TEL: [phone]    FAX: [phone]  

Mobile : [phone] 

   Website: zjteps.en.made-in-china.com