Non-Combustible Fireproof Anti-Earthquake Precast Sandwich Wall Panel for Office Partition

• Customization: Available
• After-sales Service: 5years
• Application: Exterior Wall Of Building, Wall Panel
• Model NO.: ZJT-F
• Feature: Environmental, Fireproof, Heat Preservation, Light Weight, Sound Absorption
• Thickness: 100mm, 120mm, 150mm, 200mm, 75mm
• Brand: Zjt
• Panel Material: Nonmetal
• Type: Sandwich Panels
• Material: Cement Calcium Board, EPS, Cement etc.
• Fire Rating: 4
• Certification: ISO,CE
• Customized: Customized
• Sound Absorption: 45dB
• Fire Rated: 3 Hours
• Length: 2270/2440mm
• Width: 610mm
• Transport Package: Layer Form Cloth Between Each Two Panels
• Specification: All available
• Trademark: ZJT
• Origin: Xiamen, Fujian
• HS Code: 6810919000
• Production Capacity: 200000 Square Meters/Month
• Package Size: 244.00cm * 122.00cm * 110.00cm
• Package Gross Weight: 1200.000kg

Product Description

Non-combustible Fireproof Anti-Earthquake Precast Sandwich Wall Panel for Office Partition
 

Product Description

 

 

ITEM	Specification
Length	2270/2440mm
Width	610mm
Thickness	60mm roof system 75mm roof system 90mm interior partition wall 100mm interior partition wall 120mm exterior wall, floor, roof deck 150mm exterior wall

 

Advantages

Feature
EPS Sandwich Panel 
1.Lightweight and Energy-saving 
2.Eco-friendly and Fire-proof, heat insulation.
3.Waterproof and Damp-proof 
4.Both interior and exterior
5. Easy installation 

Advantage

1. Safety and environmental protection.
Unlike those natural stones that emit harmful gases such as radon, which are not good for human health, the raw materials used for the lightweight energy-saving wall materials of polystyrene particle sandwich panels are 100% free of harmful substances and not radioactive. So it is very safe and environmentally friendly.

2. Superior fire performance.
The outer material calcium silicate board itself is a cement-based board. Its fire and moisture resistance performance is superior, and the lightweight core material can also have a fire resistance limit of more than 4 hours at a high temperature of 1000 degrees Celsius, while not emitting toxic. Gas, the overall non-combustibility is above the national level A standard.

3. The thickness is small, which increases the indoor use area.
Polystyrene particle sandwich panel energy-saving wall materials generally use 75mm wall material compared with 120 brick wall thickness is 45mm less, that is to say, the use of energy-saving lightweight wallboard, every 22m, can increase the area of 1 square meters. For a 2-storey 200m2 villa, it can increase the use area by at least 6m2 compared to the brick wall, which is equivalent to a large bathroom!

4. Assembly construction, good integrity.
Because it is assembled construction, it has a three-in-one structure. The board is connected to the board as a whole, and the impact resistance is 1.5 times that of ordinary masonry. The structure of the polystyrene particle sandwich panel is compact and does not deform. High strength, the overall seismic performance is many times higher than ordinary masonry walls!

5. Moisture proof, waterproof and soundproof.

Experiments have proved that the polystyrene particle sandwich panel can be cemented into a pool filled with water without any waterproof finish, and the back of the wall can be kept dry without leaving traces or in wet weather Condensation drops appear. Can be used in wet areas such as kitchens, bathrooms, and basements. In addition, the cement fibers on the surface of the polystyrene particle sandwich panel and its internal materials have good sound insulation effects.

6. Thermal insulation
The composition material of the polystyrene particle sandwich panel has good heat insulation function, and the composite plate with the same thickness is more than 10 times the heat insulation capacity of the brick wall! Can make indoor ambient temperature more comfortable.

7. Can be nailed.
The polystyrene particle sandwich panel can be directly nailed or expanded with bolts to hang heavy objects, such as air conditioners, with a single-point hanging force of more than 45kg; and the panel surface of the wall panel is flat and smooth without dust, and can be directly pasted Tiles, wallpaper, wood veneer and other materials for finishing.

8. Light weight and fast construction speed.
The density of the 75mm thick polystyrene particle sandwich panel is only 45kg /m2, which is equivalent to 1/7 of the weight of a 120mm thick masonry. Two workers can easily move a board, the construction is simple and convenient, and three workers can complete it in 4 days The wall installation of a 200m2  house has saved a lot of labor costs. Overall, the cost of housing has been greatly reduced.

Installation Instructions

Easy to install
 

1. Grass-roots cleaning

Clean up the grassroots that needs to be constructed, and the mortar or concrete protruding from the wall must be cleaned with tools to facilitate the construction of the next sandwich wall panel.
2. Elastic line bin
Perform the elastic line operation on the ground and the appropriate position of the wall surface to ensure that the installed sandwich wall panel can be horizontal and vertical. Position and grade the edges of the partition wall and the edges of the doors and windows, and then select the plates with the same specifications according to the dividing lines.
3.Sizing preparation
Cut the sandwich wall panel as needed, pay attention to adjust the width and length of the sandwich wall panel to minimize unnecessary losses. Then mix cement and medium sand in a ratio of 1: 2, and then add building glue to prepare a paste. When sizing, first use the water to paint the uneven grooves of the partition board, and then apply the polymer mortar to the uneven grooves of the partition board and the baseline of the floor.
4.Install wall panels
Move the sandwich wall panel to the position where it needs to be installed, stand it up, and align it up and down with the baseline. Use a shovel to pry the partition board from the bottom of it, and then press the board firmly against the board. , Make the mortar overflow from the joint, and then temporarily fix it with a wooden wedge, check the flatness and verticality of the partition wall board. After the inspection is completed, the connecting part between the wall panel and the wall panel needs to be fixed with a special steel bar at an angle of 45 downwards.
5. Grouting construction
After the sandwich wall panel is installed and calibrated, it is filled with cement mortar with a mix ratio of 1: 2 and the building glue is blended. The upper and lower gaps of the wall board and the joints between the boards must be used as much as possible mortar to fill. In the process of grouting, if you want to bury a concealed pipeline or a switch box in the wall, you can use mortar to fill it after the installation is complete.
6.Finishing
If you want to install a door frame on a lightweight partition wall, you can use a splint to cover the door directly on the wall panel, fix it with iron nails, and then use a decorative panel for the cover. Finally, the surface of the partition wall is coated with paint. You can also choose to paste your favorite porcelain to achieve certain aesthetic requirements.

Application

 

It can be used as both interior and exterior partition walls, or all kinds of decoration and building construction. Also the best material for plants, apartments, hotels, office buildings and public constructions, ect.
In addition, they are used for compartments, households, bathrooms, the interior partition walls of kitchens. In the high-rise building and housing renovation projects.
 

2270mm standard	2440mm standard	Application
2270*610*60mm	2440*610*60mm	Roof
2270*610*75mm	2440*610*75mm	Roof
2270*610*90mm	2440*610*90mm	Interior wall
2270*610*100mm	2440*610*100mm	Interior wall
2270*610*120mm	2440*610*120mm	Exterior wall/ Floor
2270*610*150mm	2440*610*150mm	Exterior wall

Contact 
Freda Lin