House Exterior Siding Wall Insulation Panel Precast Concrete Wall Panel Sandwich Panels External Wall

• Material: Sandwich Panel
• Usage: Warehouse, Villa, Dormitories, Temporary Offices, Workshop
• Certification: SGS
• Customized: Non-Customized
• Thickenss: 60/75/90/100/120/150mm
• Interial Material: EPS, Cement and Fly Ash
• Face Panel: 5mm Calcium Silicate Board
• Application: Interior Wall/Exterior Wall/Roof/Floor Slab
• Feature: Lightweight/Sound Insulation/Fireproof
• Fireproof: 3 Hours
• Sound Insulation: 42dB
• Compressive Strength: 3.5MPa
• Hang Force: 1000n
• Moisture Rate: 10%
• Heat Transfer Coefficient: 1.1-3.03W/M2.K
• Drying Shrinkage Value: 0.5mm/M
• Environment Friendly: 100% No Asbestos, No Harmless to Health
• Life Span: 70 Years
• Bear Weight: 720kg/M2
• Transport Package: Pallet+Pearl Wool+Corner Paper+Belt+Plast
• Specification: 2270/2440*610mm
• Trademark: ZJT
• Origin: Xiamen, China
• Production Capacity: 30000 Square Meters Per Year

Product Description

House exterior siding wall insulation panel precast concrete wall panel sandwich panels external wall

Product introduce

Composite wallboard is a new generation of high-performance building inner partition made of industrial materials. It is made up of a variety of building materials, replacing traditional bricks. It is environmentally friendly, energy-saving and pollution-free. It is lightweight, earthquake-resistant, fireproof, heat-insulating and sound-proof. The obvious advantages of quick construction.



Product feature

1.Hightweight the economic benefits,reduce project cost.
The light energy-saving composite wall plate is made of industrial residue fly ash, calcium silicate panel, ceramsite, silicate cement and EPS foam particles as main raw materials, the production process is simple, the cost is low, and the economic benefit is considerable.

2.Advanced technology level.
The industrialization of housing construction in this century has become irreversible. According to the analysis of the development of wall materials in developed countries, the product is in accordance with the development law, which overcomes the defects of other light wall panels and has unique performance, and will be the leader of the new wall material.

3.Lightweight,optimize structures.
 A.Traditional brick block, the wall must be located in the vertical position on the beam to adopt.
 B.Zhongjingtai wall material, which can widen the distance between beams and columns, highlight the economic benefit of mining Jingtai wall material.

 C.The wall can not be restricted by beam and column.

4.Sound insulation.
ZJT lightweight sandwich panels have good sound insulation,it is 40dB for 90mm thick wall and much better for thicker panels,the sound effects in the line with national residential sound requirements,much higher than other excuses brick wall of sound effects.

5.Waterproof.
The light partition board can be filled with cement to form a pool body without making any waterproof decoration. The back of the light partition panel can persist in dryness, leave no trace, and will not show condensed water droplets in a humid climate. Light partition panel is a professional waterproof board, with good waterproof, moisture-proof performance, can be applied to kitchen, cleaning room, basement and other wet areas.

6.Easy to construct,transport and tim esaving.
Brick masonry construction capacity of 12 individuals for eight hours a day,if use ZJT wall panel in construction,three people could complete in 60 minutes,so efficiency advantage is very significant.

Product application






Product specification
 

Product name	Lighweight eps cement sandwich panel
Length*Width(mm)	2270/2440*610
Thickness(mm)	60	75	90	100	120	150
Application	roof	interior wall			exterior wall or floor slab

Packing and shipping

1.Free packing (with normal pallet and packing belt) 2.Standard exporting packing (wrapped with plastic thin film,edge protect and good pallet): USD20-30/Package 3.Packing size: 1500-3000*610*1000mm Loading: 18 pallets per 20' container, 11000kgs-18000kgs per 20' container.



Certificate




About us

Xiamen ZhongJingtai building materials Co., Ltd, is a professional high-tech research and development company producing new wall materials, machinery and equipment development, technology production and promotion of product applications. The company is situated in the charming Xiamen city, with the convenience of water and land transportation and only ten minutes from the airport. We respond positively to the national policy on wall reforming. We have developed successfully wall panels that meet the energy saving needs of modern architecture. 
Certificate:SGS,TUV
Major Exported Countries:Middle Eat,Southeast Asia,Europe,South America




Contact us



XIAMEN ZHONGJINGTAI BUILDING MATERIALS CO. LTD.
AREA B-1.UNIT 403,NO.168 TAPU EAST ROAD,SIMING DISTRICT,XIAMEN,CHINA
Contact person:Jodie Huang  
 
 
 Website: zjteps.en.made-in-china.com