fireproof/lightweight building materials eps cement sandwich panels/sandwich panel
- Lightweight EPS Cement Sandwich Wall Panel
Typical Size
Width: 610 mm
Length: 2270, 2440, 2700&3000 mm
Thickness:50,60,75,90,100,120,150mm
Raw Material
Face panel: 4.5 mm CS board(100% asbestos free)
Core material: Cement, EPS, Sand and etc.
Spectification
| Item |
60X |
75X |
90X |
120X |
150X |
| Weight |
48KG/m2 |
55KG/m2 |
60KG/m2 |
72KG/m2 |
88KG/m2 |
| thickness |
60mm |
75mm |
90mm |
120mm |
150mm |
| Length |
2270mm/2440mm |
| Width |
610mm |
Why choose us?
| |
features |
more detail |
| 1 |
green |
100% free of harmful substances and are of A non-radioactive products, standard GB6566-2001. |
| 2 |
lightweight economic |
The volume-weight only 750-800kg/m3 , the weight of 75mm thickness ZJT board is 60kg/m2, equal to 1/6 of brick weight, 1/7 of 120mm thickness masonry. |
| 3 |
increase valid space |
the thickness of ZJT wall decreases 85mm by using 75mm thickness ZJT boards. Thus, valid space increases 1/m2 per 11.8mm. in other words, it can increase 6/m2 per 100/m2 . |
| 4 |
moistureproof waterproof |
will keep dry and leave no stains. During humid days, the boards will not condense water either. suitable to be installed in such wet areas as kitchens, bath rooms, basements because of its moistureproof and waterproof. |
| 5 |
fireproof |
Fireproof limit of ZJT boards is more than 4 hours and does not emit toxic gases under 1000 degree. The nonflammable performance reaches national A-class standard. |
| 6 |
heat insulation |
ZJT board is composed of special material to keep heat and thermal within a favorable condition. At same time, the ZJT boards are able to adjust moisture automatically and keep moisture at a balance level. |
| 7 |
sound insulation |
The raw materials of ZJT boards have good performance in sound insulation. ZJT board with 90mm thickness gains sound insulation of 42dB. |
| 8 |
walls can be nailed and grooved |
ZJT board can be grooved to have conductor arrangement or nailed to hang heavy object. The surface of ZJT board is smooth enough to make finisher processing directly with tile, wall trim and so on. |
| 9 |
good integration |
By using steels at the joints, the strength of walls is high enough to do partition in large story height and long span structures and it anti-seismic performance is several times higher than masonry. |
| 10 |
easy and fast construction |
It can be cut to adjust length and width at will. The process of installation is easy and fast, without the need of plastering. |
Installation
Alignment:making the base line of the installation position of the wallboard.
↓
Sawing of wallboard:cutting and adjusting the width and length of wallboard on the basis of the requirement.
↓
Sizing: blending the ZJT cement mortar and plastering it into the gap and base line bettwen the wallboard.
↓
Fitting the sheet: moving the mortar-covered wallboard to the right position and using crowbar to ensure the wallboard are tight with another one.
↓
Placing the wallboard: filling the vacant position of the wall
↓
Adjustment: fixing the wallboard with wooden wedge, spiking steel bar into the glued wallboard an two steel bars should be spiked beyong 120mm wall board.
↓
Filling joints: clear away the facial panel cement mortar and press it tightly with round steel bar.
↓
Installation of crack-resistant material: after about one week, taking out the wooden wedges.
↓
Insertion of wires: do not dig the same place in the two wallboard facial and the deep can't beyond 2/3 of the wallboard.
↓
Platering paint: to finish the wal, tiles can be taste without any scraping and wallpaper also can be applied directly.
Accessory Materials
Packing and Loading
Free packing: normal pallet + packing belt
Standard exporting packing: good pallet+pearl wool+corner protective paper+packing belt+plastic thin film
Loading: Normally 18 pallets per 20' container or according to clients' requirements
Application
1. Floor System
Itcan be innovatively used as floor board.Besides the basic characteristics like sound insulation,waterproof,dampproof,this system has the outstanding advantages such as hight load-bearing capacity, antistatic electricity, friction resistance, high strength, convenient for wire groove and water pipe inbuilt, corrosion resistance,no deformation,no split,etc.,which is much suitable for the fields including the floor plate of additional top floor, factory,workshop,warehouse,etc.
2. Villa&Exterior Wall System
Itcan automatically adjust indoor air and water content with the season and climate changes, which can keep the temperature at an invariable temperature level ,and such ecology effect just goes with the tide of modern residential building. It is widely applied to various modular house ,low buildings, apartment, villas,and city house
3. Interior Partition System
With excellent fireproof, best hanging force, sound insulation, heat insulation, waterproof,
easy Installation and the like characteristics, light weight compound sandwich board have been widely applying to the special positions like partition panel of high-rise and mega-high-rise buildings.
4.Roof System
This system not only solves the problem of roof leakage,but also has the advantages such as heat insulation, neat joint surface, high temperature resistance, etc.The features of light weight and hight strength reduce the use of roof beamcolumn,reduce the consumption of materials,improve security;its easy construction time,which bring out its hight integrated performance-price ratio.
Our Services
Pre-sales service
Accept user's consultation
Provide market investigation and project assessment
Confirm the scale of operation
Design factory construction scheme for the user
Offer factory construction drawings
Involved in factory construction drawings
Involved in factory construction process guidance
Sales service
Supervise water, electricity and other infrastructure construction process
Set up management framework and make training of production management and equipment for the user Maintenance, quality control, purchasing and marketing personnel Offer material proportioning formula
After-sales service
Establish user profiles
Accept 24 hours technical consulting service
Engineers regularly make after-sales return visit
Extended service
Equipment system upgrade
Equipment and mould update
The latest information
Application of new technology and new process
Solemnly promise:
Lifetime maintenance for the equipment
The sales service team will be responsible for after-sales service and timely provide users with convenience to make the best economic benefits of the equipments
Installation
Global Market
African Market: Reunion Island, Madagascar, Mayotte, Comoros Island, Mauritius, Kenya, Tanzania, Zambia and Uganda, Ghana, Ethiopia, Mozambique, Congo, Burkina Faso
Asian market: Philippines, Sri Lanka, Indonesia, Singapore, India, Malaysia, Vietnam
Mid-Eastern Market : Qatar ,Dubai, Behrain, Jordan, Saudi Arabia
South-American Market : Brazil, Venezuela, Chile, Columbia, Dominica Republic, Ecuador
Pacific Ocean market: Australia, New Zealand, Papua New Guinea, Tahiti, Fiji
Contact
Xiamen Zhongjingtai Building Materials Co.,Ltd
Jodie
Tel:+86-592-5216902
Fax:+86-592-5216317
Mobile:+8613695041249
Website:Http://zjteps.en.made-in-china.com
Audited Supplier 
){kind=link}