Customization: | Available |
---|---|
After-sales Service: | 5years |
Application: | Exterior Wall Of Building, Roof, Wall Panel |
Still deciding? Get samples of US$ 0/Piece
Order Sample
|
Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
---|
Payment Methods: |
|
---|---|
Support payments in USD |
Secure payments: | Every payment you make on Made-in-China.com is protected by the platform. |
---|
Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
---|
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
Freda Lin
freda(@)zhongjingtai(.)com
(+86)136/6600/3756
Facebook: Freda Lin
Composition of EPS Wall Panel
Proficaton and Properties of EPS Wall Panel
Item | Parameter Index Specifications | ||||||
60mm | 75mm | 90mm | 100mm | 120mm | 150mm | ||
1 | Anti-impact capacity/times | ≥5 | ≥5 | ≥5 | ≥5 | ≥5 | ≥5 |
2 | Anti-bending damage load/times over deadweight | ≥3.0 | ≥3.0 | ≥3.0 | ≥3.0 | ≥5.0 | ≥5.0 |
3 | Compressive strength/Mpa | ≥3.5 | ≥3.5 | ≥3.5 | ≥3.5 | ≥3.5 | ≥3.5 |
4 | Softening coefficient | ≥0.8 | ≥0.8 | ≥0.8 | ≥0.8 | ≥0.8 | ≥0.8 |
5 | Surface density(kg/m²) | ≤70 | ≤70 | ≤90 | ≤90 | ≤110 | ≤110 |
6 | Moisture rate(%) | ≤10 | ≤10 | ≤10 | ≤10 | ≤8 | ≤8 |
7 | Dring shrinkage value(mm/m) | ≤0.5 | ≤0.5 | ≤0.5 | ≤0.5 | ≤0.5 | ≤0.5 |
8 | Hang force(N) | ≥1000 | ≥1000 | ≥1000 | ≥1000 | ≥1000 | ≥1000 |
9 | Sound insulation capacity in the air(dB) | ≥35 | ≥35 | ≥40 | ≥40 | ≥45 | ≥50 |
10 | Fire endurance(h) | ≥1.5 | ≥1.5 | ≥2.5 | ≥2.5 | ≥3.0 | ≥4.5 |
11 | Heat transfer coefficient(w/m².K) | ≤2.0 | ≤2.0 | ≤2.0 | ≤2.0 | ≤2.0 | ≤2.0 |
12 | Inner radiation index | ≤1 | ≤1 | ≤1 | ≤1 | ≤1 | ≤1 |
13 | Outer radiation index | ≤1 | ≤1 | ≤1 | ≤1 | ≤1 | ≤1 |
14 | Frost resistance(shall show no visible cracks and surface without change) | _ | _ | Shall show no visible cracks and surface without change | |||
15 | The combustion properties(A1 or A2) | _ | _ | A1 or A2 |
Advantages of EPS Wall Panel
Applications of EPS Wall Panel
Installation and Accessory Materials
1. Card Slot
Specification | Size |
150/120 | 150/120*60*1.5 |
100/90 | 100/90*60*1.5 |
75/60 | 75/60*60*1.5 |
2. Special putty powder for interior wall
1) Dosage: Theoretical consumption value: 1-1.5 kg/m2 (putty thickness 1 mm).
2) Mixing: The water required is based on the construction consistence required. After mixing evenly, place for 10 minutes and then mixing again when you apply.
3) Surface treatment: The wall surface should be solid and without ash and dirt, and the water content of the wall surface should be less than 5%.
4) Interface Treatment: If the wall surface is smooth or a new-type building material, such as gypsum partition board, polystyrene board, paper-faced gypsum board, etc., an interface agent should be used for interface treatment.
5) Leveling: Leveling of putty powder should be done in a semi-dry state (lightly pressed by hand without deformation). After curing, leveling with emery cloth is possible.
6)Product standard: JG/T298-2010(Y)
7) Construction temperature: Above 5ºC, the curing process temperature is not lower than 0ºC.
8) Storage and transportation: Store in a cool and dry place with a shelf life of 6 months. The product is non-toxic and non-flammable, and storage and transportation can be handled in accordance with the "Non-Dangerous Goods Rules".
9) Safety and environmental protection, efficient leveling, water and alkali resistance, durable and strong.
Contact Us
NEW THINGS ARE WORTHY OF BEING EXPLORED!!!