| Feature: | Environmental, Fireproof, Light Weight |
|---|---|
| Fire Rating: | 4 |
| Certification: | ISO9001 |
| Customized: | Customized |
| Materials: | Calcium Silicate Board |
| Core Material: | Cement, EPS, Fly Ash.etc |
| Samples: |
|---|
| Customization: |
|---|
Suppliers with verified business licenses
Audited Supplier Impact Resistance Good Safety Performance Cement Sandwich Panels for Industrial Building
Components of Cement Sandwich Panels
Boards: smooth, non-asbestos, calcium silicate boards , 5mm thickness each side
Core: lightweight core of portland cement and expanded polystyrene bead aggregates
Finishing: no need for plastering
Between panels: tongue and groove system using adhesive material
No Smoke emission, No Toxic gas distillation and No Water penetration
Strength: No cracking, No breakage
| Weight : 67kg/m |
| Sound Isolation: 46 dB |
| Ultimate Wind Velocity: 324km/h |
| Fire resistance: 3 Hours |
| Axial Load Bearing: 14.7ton/panel |
| Bending load: 5.00 kN/m² |
| Thermal conductivity (k Value): 0.20W/M.C |
| Thermal Resistance (R Value): 0.50 M²K/W |
| (U Value): 2.0W/M²K |
Advantages of Sandwich Panel
1. Thermal Insulation & Heat Insulation
Nowadays, the construction industry attaches great importance to energy-saving property of buildings. EPS cement wall panel is made of calcium silicate board, cement, sand, water and ect, through a curing process with steam of high temperature and high pressure. In addition, the internal alveolate structure also contributes to its remarkable thermal insulation & heat insulation property.
2. Better earthquake resistance and overall stability:
Assembled into a whole structure, wall panels has an impact resistant capacity which is 1.5 times as high as that of normal masonry walls. The earthquake resistances is tens of times higher than normal masonry walls, meeting the requirement for buildings to resist earthquake of up to 8 degrees.
3. Easy installation:
The wall panel can be grooved freely, nailed directly or embedded with expansion bolts to hang heavy things; The single-point hanging strength is over 45kg; In addition, the wall panel has a flat and smooth surface, which is compatible with tiles and wall paper as the finish.
Installation Process of Sandwich Panel
1. Paying-off and Sandwich Wall Panels Arrived on Site
Adopting high precision laser alignment instrument to eject double lines of panel thickness on axial line of panel installation location, move the panel to the settled location according to different specifications.
2. Sawing Panel According to Requirement
Adopting hand-hold electric saw cutting the panel according to different need, make sure maximum using each panel to reduce the waste.
3. Sizing
Sizing the bump slots and even up the special ZJT panel adhesive into the bump slots and baseline of the floor.
4. Installation
Erected the painted panel with adhesive and move it to the prepared installation site, adjusting the panel to fit both of the baseline and tighten each panel to push the extra polymer mortar out of the joint crack, fixing the panel by wooden wedge.
5. Correction and Fixation
Correcting the panel position by using 2m levelness & verticality straight guide rule, adopting expansion rubber together with 6mm or 8mm steel bar to fix the panel.
6. Grouting and Filling Thick Liquid
Leave the installed and corrected panel for one day, adopting BOYUEJIA special panel adhesive to filling the joint crack. Remove wooden wedge and smooth the crack by polymer mortar.
7. Slotting and Wiring
Adopting hand-electric saw to cut the slotting for switch box or concealed line if needed, smooth the slotting by polymer mortar after installation.
8. Sticking Anti-Crack Tape
Sticking anti-crack tape in 3-5 days after grouting to prevent crack which may caused by long time expansion or contraction.
9. Installing Door Frame
Reserve holes for door and window, and fixing the holes by plywood line anchor.
10. Decoration
Sandwich wall panel do not need extra plaster for the surface, decorating the wall surface directly by tiles, wallpaper or other painting.
Finish work of Cement Sandwich Panels
The reform and development of the wall is a major change in the construction industry. From the beginning of the earth wall, the red brick wall to the later cement wall, until now the appearance of the lightweight partition panels.
Lightweight partition panels has been widely used in recent years because it has many advantages, such as sound insulation, fireproof, environmental protection, moisture proof and waterproof, heat insulation, of course, except for some, lightweight partition panels for a construction family in terms of it, it makes a lot of sense. Nowadays people like convenient life. It is a troublesome thing to decorate the house. Therefore, The lightweight partition panel is compliant. Developed by the wishes of the vast number of consumers.
The lightweight partition panel does not need the same material as the original wall material. It also needs water and cement, because it is a wall material with a hollow floor and a male and female groove on both sides. Simply erect the board and apply a small amount of caulking mortar to the male and female shovel, then it can be assembled, so this also reduces the cement or the process of cement, which also saves a lot of time for decoration, from another aspect. In this way, the lightweight partition board also brings certain advantages to the protection of the environment. First of all, except for its own environmental protection effect, since it does not use water and cement, it is not necessary to make the home dirty everywhere. This also saves you the time to clean your home, so that your home can look clean when it is renovated, and there will be no excess cement in the place after the renovation, and the lightweight partition panel can also be arbitrarily cut to adjust the width, length, and material loss rate, in other respects, construction waste is also reduced. Therefore, the construction is simple and convenient, and the labor intensity is also reduced. Because the quality of the lightweight partition board is very light, unlike other wall surfaces, the transportation is also light and convenient during construction, which greatly speeds up the construction progress and can also shorten the construction period.
The advantages of lightweight partition panels and their contribution to the construction industry have made more and more people willing to choose it. Do you need renovation? Still worrying about what kind of material to choose? Still thinking about it? Choosing a lightweight partition panels will be your best choice.
More information(catalogue, project, installation process) please contact
Freda Lin
Xiamen ZhongJingTai Building Materials Co,. Ltd
Website: http://zjteps.en.made-in-china.com
Tel:0086 136 6600 3756
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}