| Customization: | Available |
|---|---|
| Acoustic Performance: | NRC 0.9 |
| Application: | Classroom, Home Theater, Office Meeting Room, Recording Studio, Restaurant |
|
Still deciding? Get samples of US$ 0/Piece
Order Sample
|
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
| Payment Methods: |
|
|---|---|
| Support payments in USD |
| Secure payments: | Every payment you make on Made-in-China.com is protected by the platform. |
|---|
| Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
|---|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Soundprood Thermal Insulation Easy Install Portland Cement Floor Panel for Office Building
Freda Lin
freda(@)zhongjingtai(.)com
(+86)136/6600/3756
Facebook: Freda Lin
Information of EPS Sandwich Wall Panel
The eps sandwich panel uses ordinary portland cement, sand and fly ash or other industrial waste such as water slag, slag, etc. as fine aggregate, and then adds polystyrene particles and a small amount of inorganic chemical additives to cooperate with full automatic high efficiency A special mixing system for forced light aggregates, which introduces air during the mixing process to form a honeycomb-like stable pore in the core layer to further reduce the product bulk density, which not only reduces the material cost, but also achieves the ideal thermal insulation and sound insulation effects. Polystyrene particles and pores are evenly distributed inside the product, so that the concrete forms a circular honeycomb skeleton, which supports each other and increases the pressure resistance. The addition of fly ash not only improves the workability of the concrete slurry, but most importantly, it enhances the strength of the cement in the late stage, thereby enhancing the strength after the product is cured, the flexural strength is increased by 80%, and the modulus of rupture is increased by more than 50%.
Application of Inner Wall Sandwich Panel
| Item | |
| Light weight | Capacity 650kg/m³, 65kg/m2 for 100mm panels, 1/6 of traditional wall material. |
| Waterproof | Excellent |
| Fire resistance | A Grade, more than 3 hrs based on SGS test. |
| Space Saving | 100mm for interior wall and 150mm for exterior wall, save 4.26m2 per 100m2 space |
| Sound Insulation | ≥42dB based on SGS test, soundproof, sound absorption. |
| Hanging Force | Single point hanging force 50kg while embed handing force can exceed 150kg. |
| Anti-Seismic | Class 8, anti earthquake, less damage to people after the wall falls. |
| Eco-friendly | 100% no asbestos, asbestos free. Recyclable. |
1. Lightweight EPS sandwich panel as non-load-bearing internal partition wall can be used in hotels, hotels, schools, hospitals, office buildings, high-end apartments, stadiums, exhibition centers and other buildings to meet different customers' needs for modern and indoor indoor and outdoor environments. Claim. This product is simple and convenient for splicing and installation, more than 6 times faster than the block wall, which can greatly shorten the construction period, and the construction is particularly fast.
2. Hotel, ktv, meeting room, pay more attention to privacy and sound insulation. The lightweight EPS sandwich panel is a solid wall board, which meets the Chinese people's need for a solid wall. The closed microporous structure inside the plate effectively blocks the dual functions of sound transmission and sound absorption to ensure privacy. The air insulation is ≥48dB, and its sound insulation effect is better than that of ordinary aerated bricks.
3. For leisure and entertainment restaurants, due to the high strength of lightweight partition boards, it can hang heavy objects such as wall cabinets, air conditioners, and televisions: decorative plates can be directly nailed to the wall boards with iron nails. It can be sawed, nailed, drilled, cut, and the building pattern can be made at will. The surface of the lightweight partition board has good flatness, no plastering is required, and wallpaper, wall tiles, and spray coating can be directly applied after filling.
4. Workshops and factories (including steel structures). Lightweight partition boards are mainly considered as fire prevention and fire protection requirements as workshop and factory partition walls. Lightweight partition boards have undergone high-temperature combustion tests at 1000 ºC. The test requires that no harmful gas is generated during the combustion process, and it belongs to Class A fireproof materials.
Construction process of Inner Wall Sandwich Panel
1. Grass-roots cleaning
Clean up the grassroots that needs to be constructed, and the mortar or concrete protruding from the wall must be cleaned with tools to facilitate the construction of the next sandwich wall panel.
2, Elastic line bin
Perform the elastic line operation on the ground and the appropriate position of the wall surface to ensure that the installed sandwich wall panel can be horizontal and vertical. Position and grade the edges of the partition wall and the edges of the doors and windows, and then select the plates with the same specifications according to the dividing lines.
3.Sizing preparation
Cut the sandwich wall panel as needed, pay attention to adjust the width and length of the sandwich wall panel to minimize unnecessary losses. Then mix cement and medium sand in a ratio of 1: 2, and then add building glue to prepare a paste. When sizing, first use the water to paint the uneven grooves of the partition board, and then apply the polymer mortar to the uneven grooves of the partition board and the baseline of the floor.
4.Install wall panels
Move the sandwich wall panel to the position where it needs to be installed, stand it up, and align it up and down with the baseline. Use a shovel to pry the partitionboard from the bottom of it, and then press the board firmly against the board. , Make the mortar overflow from the joint, and then temporarily fix it with a wooden wedge, check the flatness and verticality of the partition wall board. After the inspection is completed, the connecting part between the wall panel and the wall panel needs to be fixed with a special steel bar at an angle of 45 downwards.
5. Grouting construction
After the sandwich wall panel is installed and calibrated, it is filled with cement mortar with a mix ratio of 1: 2 and the building glue is blended. The upper and lower gaps of the wall board and the joints between the boards must be used as much as possible mortar to fill. In the process of grouting, if you want to bury a concealed pipeline or a switch box in the wall, you can use mortar to fill it after the installation is complete.
6, Finishing
If you want to install a door frame on a lightweight partition wall, you can use a splint to cover the door directly on the wall panel, fix it with iron nails, and then use a decorative panel for the cover. Finally, the surface of the partition wall is coated with paint. You can also choose to paste your favorite porcelain to achieve certain aesthetic requirements.
Loading and Packing of Inner Wall Sandwich Panel
1). Free packing, normal pallet + packing belt
2). Standard exporting packing, good pallet+pearl wool+corner protective paper+packing belt+plastic thin film
3). Loading: Normally 24 pallets per 40' container or according to clients' requirements
|
Specification |
.Length:2270mm,2440mm |
|
packing |
Free packing,normal pallet+packing belt |
|
MOQ |
One 20' container |
Trade Terms
1). Payment: T/T or L/C at sight;
2).Lead time: 20-25 Working days;
3). Shipping freight are quoted under your requests;
4). Shipping port: Xiamen port, Mainland China;
5). Discount: based on the order quantity;
More information(catalogue, project, installation process) please contact
Freda Lin
Xiamen ZhongJingTai Building Materials Co,. Ltd
Website: http://zjteps.en.made-in-china.com
Facebook: Freda Lin
){kind=link}