100mm Calcium Silicate EPS Cement Sandwich Wall Panel for Floor
Introduction of eps cement sandwich wall panel
The light composite sandwich wall plate is made by using high-strength cement as a cementing material as a surface layer, and is made of alkali-resistant glass fiber mesh cloth and non-woven fabric, And a unique thermal insulation light wall board is constructed.
Features of cement sandwich wall panel
1, the weight is light.
It is 1 / 4 of red brick and 1 / 5 of concrete, which not only effectively reduces the weight of the building, but also reduces the economic investment of the foundation, and is convenient for construction and transportation. Manual handling and installation, does not affect the synchronous construction, material transport volume is small, building load is reduced, construction cost is reduced.
2, sound insulation.
The light partition material can be soundproof 40 × 50 decibels to ensure that the products can be used in office, commercial, entertainment, residential and other buildings.
3. Water resistance.
The light partition board can be filled with cement to form a pool body without making any waterproof decoration. The back of the light partition panel can persist in dryness, leave no trace, and will not show condensed water droplets in a humid climate. Light partition panel is a professional waterproof board, with good waterproof, moisture-proof performance, can be applied to kitchen, cleaning room, basement and other wet areas.
4, the seismic effect is good.
The elastic modulus is low, the impact energy absorption is fast, and the seismic grade can reach grade 8.
5, heat preservation and heat insulation.
The thermal conductivity of light partition material is 0.12W / m. K, which can greatly reduce the frequency of cold and warm air conditioning. 9 cm thick wall board can match the 24cm brick wall, and the wall board can meet the requirements of national standard without attaching heat insulation material, and provide a comfortable living environment for people.
6, easy to construct.
The lightweight partition material can be drilled, sawed, nailed, and the size can be adjusted freely, so the installation of water and electricity pipes and buried lines are more convenient than all wallboards.
Advantages of sandwich wall panel
| Advantages |
| Light weight |
Lightweight wallboard production materials using lightweight aggregate as the main aggregate, the specific gravity is light. With 35% vacancy rate, the bulk density is 250 kg / m ~ 3. 1 / 4 for red brick 1 / 3 concrete. This is not only effectively reduced in construction and transportation. |
heat-insulation and heat-
|
The thermal conductivity of the light wall plate is 0.12 kC/ mh, which is only 1/10 (in the dry state) of the concrete, so that the use frequency of the cold and warm air conditioner can be greatly reduced. 90mm thick, the light wall plate does not need to be provided with the heat insulating material, so that the national standard requirement can be met, and a comfortable living environment is provided for people.
|
high strength
|
The light wall plate is produced by a screw extrusion method, so that the strength is high, and the connection of the plate is connected with the concave-convex groove, so that the whole bearing can reach or even exceed the strength of the ordinary brick masonry, and the wall plate can be optionally decorated and hung.
|
| Strong fire resistance |
The light wall board itself is an inorganic substance, is in no way burning, does not generate toxic gas, is an ideal fire-insulating material, also provides a certain fireproof function for the structure, and the fireproof capacity is up to 3 hours by taking the 90-mm thick wall board as an example.
|
| High accuracy |
The scientific production technology of light wall panel makes the product highly accurate, precise seam, easy to process, cutting saw, wiring slot, etc. Change the difficult situation of brick wall embedding in the past. |
| Good sound insulation |
According to its thickness, the volume of 35 × 50 decibels can be reduced, which is an excellent building material with dual effects of sound insulation and sound absorption. |
| impermeability |
Light wall board using screw extrusion production, high density, its own cement products, can effectively block the diffusion of water, can be safely used in kitchen, guard wall. |
Applications of wall panel
1) • Interior wall, Partition wall & exterior wall:
It has been widely applied to interior partition of high-rise buildings, with the advantages of excellent fire-proof, best hanging force and easy installation.
2) Floor System:
It's much suitable for the floor plate of factory, workshop, warehouse, etc.
Pack and shipping
1). Free packing, normal pallet + packing belt
2). Standard exporting packing, good pallet+pearl wool+corner protective paper+packing belt+plastic thin film
3). Loading: Normally 18 pallets per 20' container or according to clients' requirements
Install process
In todat's market, time plays a major role and may be a deal breaker for construction companies and the developers. A lot of project failed to sustain the expected return of investments due to failure in finishing the project on time. However, our product, compared to the traditional block work building system, can be delivered to the site, installed and painted 5 times faster.
On a big project scale, 40%-60% of time spent on assembing, fixing, plastering and painting the blocks will be reduced. In other words, When use our ZJT panel it will not exist which take us directy to the second advantage which is cost saving.
Light weight composite sandwich wall panels installation process:
1.Put wire,transport board in place,popup or down the wall plate and gauge double in the respective axis mount.
2.Any use of drilling to cut according to wall plate specifications.
3.Put cement binder and wall board in foundation.
4.Put cement binder,two pieces of the tenon on one side cement to wipe polymer mortar on any tongue and sides.
5.Installation,firstly prepare for the installation of plate moved into connection location,wall correction with a crowbar,use force tightly,to let polymer mortar extrusion from the joints in high spirits.
6.Adjustment,use wood wedge to bit into the bottom of the wall plate so that it adjust vertical formation
7.Correction,fix,use more than 2m or 2m guiding rule to check vertical,flat correction.
8.Grout,fill the pulp,use polymer mortar to infill and flatness after correcting the wall body,use polymer mortar to fill the gap size up or down.
9.Fixed,upper part of wall panels with Φ6mm or Φ8mm steel reinforce in the middle of walls by 45 degrees to bit into,the bottom with "7shaped"ribbed steel,one head is bitten into concrete base,the other head is bitten into the wall plate
Simple installation process:
1.Put wire 2.Cutting 3.Put cement binder 4.Put cement binder
5.Adjustment 6.Installation 7.Correction 8.Fill the pulp 9.Fixed
Compant brief introduction
Xiamen ZhongJingtai building materials Co., Ltd, is a professional high-tech research and development company producing new wall materials, machinery and equipment development, technology production and promotion of product applications. The company is situated in the charming Xiamen city, with the convenience of water and land transportation and only ten minutes from the airport. We respond positively to the national policy on wall reforming. We have developed successfully wall panels that meet the energy saving needs of modern architecture.
Our clients and exhibitions
FAQ
1. Is EPS cement sandwich panel lightweight?
Yes, it is. Capacity six hundred and fifty to eight hundred KG per cubic meter, it is one sixth of brick wall, even is one half of aerated concrete block.
2. Is EPS cement panel fireproof?
Yes, it is. It control fire slipping out of the origin unit, prevent fire spreading, prevent toxic gas generating or insolating Through fire high temperature test for four hours, panels only have skin injury
3. Is EPS cement panel thermal insulation?
Yes, it is. EPS cement panel's composite material determines that it has excellent heat insulation and thermal insulation functions
4. Is EPS cement panel soundproof?
Yes, it is. EPS cement panel's surface is fiber cement board, interior composite material and the concave-convex grooves between two panels make it has excellent sound absorption and soundproof function. 100mm thickness isolate sound beyond 45dB, it's much higher than blockwork
5. Is EPS cement panel strength strong?
Yes, it is. Anti-impact performance is 1.5 times of the blockwork, With steel structure fixed, can make high levels, big span wall, overall anti-seismic performance is 10 times of normal blockwork
6. After installation can it be paint without putty?
Yes, it can. You can paint directly without putty, and also can decorate without plastering
Contact us
Xiamen Zhongjingtai Building Materials Co., Ltd
Unit2A, Lianchang Building, No6-8 Huli District, Xiamen, China
Contact person:Jodie Huang
TEL: +86-592-5216902 FAX: +86-592-5216319
Mobile : +86-13695041249
Website: zjteps.en.made-in-china.com
Audited Supplier 
){kind=link}
){kind=link}