| Customization: | Available |
|---|---|
| Feature: | Environmental, Fireproof, Light Weight |
| Certification: | ISO9001 |
|
Still deciding? Get samples of US$ 0/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
No Toxic Gases Strong Durable Sandwich Wall Panels for Accommodation
Sandwich Wall Panels Information
Each panel have a grove of 5mm between the calcium silicate board and the core along the height of the panel from both internal sides. Which should be filled together with the opposite panel grove with the adhesive material.
Each panel have a recess of 1mm depth and 30mm width alongside the height of the panel from both outsides, to be also filled up with the adhesive material together with the inside groove to ensure the prevention of cracks.
Application of Sandwich Wall Panels
|
ITEM |
Specification |
|
Length |
2270/2440mm |
|
Width |
610mm |
|
Thickness
|
60mm roof system 75mm roof system 90mm interior partition wall 100mm interior partition wall 120mm exterior wall, floor, roof deck 150mm exterior wall |
1) Urban complexes
2) Hotel walls High-end office space
3) Municipal key projects Apartment
4) Hospitals
5) Schools
6) Mall shops partition
7) Professional fire protection projects
8) Reconstruction project
9) Underground space
Advantages of Sandwich Wall Panels
1. Fire Proof: 5mm calcium silicate board is fireproof, Eps Cement sandwich panel can be against high temperature for 4 hours.
2. Water Proof: Experiment has proved that water pool can be made by Eps cement sandwich panel without absorbing any water and no leakage at all after one year.
3. Sound Insulation: The inside of wall panel material (EPS polystyrene grain) has fine sound insulation and sound absorbing function.
4. Easy to Install: Using our installation material (PU foam and Cement Adhesive) is easy to build house.
5. Labor Cost Saving: As wall panel is easy and fast to construct, the labors can be cut down in the same work and time.
Installation of Sandwich Wall Panels
1. Paying-off and Sandwich Wall Panels Arrived on Site
Adopting high precision laser alignment instrument to eject double lines of panel thickness on axial line of panel installation location, move the panel to the settled location according to different specifications.
2. Sawing Panel According to Requirement
Adopting hand-hold electric saw cutting the panel according to different need, make sure maximum using each panel to reduce the waste.
3. Sizing
Sizing the bump slots and even up the special ZJT panel adhesive into the bump slots and baseline of the floor.
4. Installation
Erected the painted panel with adhesive and move it to the prepared installation site, adjusting the panel to fit both of the baseline and tighten each panel to push the extra polymer mortar out of the joint crack, fixing the panel by wooden wedge.
5. Correction and Fixation
Correcting the panel position by using 2m levelness & verticality straight guide rule, adopting expansion rubber together with 6mm or 8mm steel bar to fix the panel.
6. Grouting and Filling Thick Liquid
Leave the installed and corrected panel for one day, adopting BOYUEJIA special panel adhesive to filling the joint crack. Remove wooden wedge and smooth the crack by polymer mortar.
7. Slotting and Wiring
Adopting hand-electric saw to cut the slotting for switch box or concealed line if needed, smooth the slotting by polymer mortar after installation.
8. Sticking Anti-Crack Tape
Sticking anti-crack tape in 3-5 days after grouting to prevent crack which may caused by long time expansion or contraction.
9. Installing Door Frame
Reserve holes for door and window, and fixing the holes by plywood line anchor.
10. Decoration
Sandwich wall panel do not need extra plaster for the surface, decorating the wall surface directly by tiles, wallpaper or other painting.
Can sandwich wall panels be recycled?
Sandwich wall panel have a service life of at least several decades. Even after decades, sandwich wall panels are also It can be recycled and reused, so it is very environmentally friendly.
Sandwich wall panel has strong dispersibility and safe fluidity before drying, and it is easy to be closely combined with the upper filling layer, avoiding the void formed by the heat preservation of benzene board and having good strength. A large number of porous independent pores are formed to absorb sound well. The weight per cubic meter is about 400-500 kg. The product construction is convenient, civilized and short in construction. No sand, cement and other materials are needed in the construction. The materials are simple, efficient, small in size, occupying less resources such as site equipment, no construction waste, and no plastering after construction. The traditional block wall requires 12 people for 60 minutes of construction. It takes only 3 people and 60 minutes to complete the wave board, saving labor costs.
More and more clients choose sandwich wall panel. The product's reputation is also very good, and it is currently the most popular building material in the construction industry.
Want to know more about sandwich wall panel, please contact freda.
Contact Person: Freda Lin
Website: http://zjteps.en.made-in-china.com
Company Address:Xiamen ZhongJingTai Building Materials CO., Ltd.
Unit 2A, Lianchang Building, No 6-8Huli District,Xiamen, China.
){kind=link}