| Customization: | Available |
|---|---|
| After-sales Service: | 5years |
| Warranty: | 5years |
|
Still deciding? Get samples of $ !
Order Sample
|
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
| Payment Methods: |
|
|---|---|
| Support payments in USD |
| Secure payments: | Every payment you make on Made-in-China.com is protected by the platform. |
|---|
| Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
|---|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Solid Composite Prefabricated Thermal Insulation 3D Panels EPS Prefab Wall Board for Modular Housing
Information of EPS Wall Panel
EPS wall partition sandwich boards are based on calcium silicate board as panel, the core filled with lightweight materials such as cement, EPS polystyrene foam particles and fly ash, etc. This product has many comprehensive advantages of solid, light weight, thinner, high strength, shock resistance, fireproof, waterproof, sound insulation, heat insulation, easy cutting, can be arbitrary slotted, dry working, low-carbon and environment friendly. They are widely used in all kinds of building decoration and construction.
|
ITEM |
Specification |
|
Length |
2270/2440mm |
|
Width |
610mm |
|
Thickness
|
60mm roof system 75mm roof system 90mm interior partition wall 100mm interior partition wall 120mm exterior wall, floor, roof deck 150mm exterior wall |
Advantages of EPS Wall Panel
1) Energy-saving, lightweight, and environmental protection
2) Plystyrene granule in Vanjoin board has good heat-insulation effect and heat lost ratio is far below the other brick wall building
3) Energy-saving effects of the building is greatly improved
4) Raw materials do not include harmful substances
5) Environmental products, it is highly recommended by the government
6) Capacity: 650kg/m3, just one sixth of the brick building
7) Comparison of inner wall panel 75 and 120mm it will increase 12m practical area, for 100m2 house, it will increase 4.16m2
8) Waterproof and damp resistant
9) With fireproof feature
Application of EPS Wall Panel
1. Applied to concrete frame structure.
2. Apply to steel structure building system.
3. Applied to the ground-floor detached house (villa).
4. Applied to the roof rebuilding project.
5. Applied to various types of assembled light-weight building structures.
1.Paying-off and Sandwich Wall Panels Arrived on Site
Adopting high precision laser alignment instrument to eject double lines of panel thickness on axial line of panel installation location, move the panel to the settled location according to different specifications.
2.Sawing Panel According to Requirement
Adopting hand-hold electric saw cutting the panel according to different need, make sure maximum using each panel to reduce the waste.
3.Sizing
Sizing the bump slots and even up the special ZJT panel adhesive into the bump slots and baseline of the floor.
4.Installation
Erected the painted panel with adhesive and move it to the prepared installation site, adjusting the panel to fit both of the baseline and tighten each panel to push the extra polymer mortar out of the joint crack, fixing the panel by wooden wedge.
5.Correction and Fixation
Correcting the panel position by using 2m levelness & verticality straight guide rule, adopting expansion rubber together with 6mm or 8mm steel bar to fix the panel.
6.Grouting and Filling Thick Liquid
Leave the installed and corrected panel for one day, adopting BOYUEJIA special panel adhesive to filling the joint crack. Remove wooden wedge and smooth the crack by polymer mortar.
7.Slotting and Wiring
Adopting hand-electric saw to cut the slotting for switch box or concealed line if needed, smooth the slotting by polymer mortar after installation.
8.Sticking Anti-Crack Tape
Sticking anti-crack tape in 3-5 days after grouting to prevent crack which may caused by long time expansion or contraction.
9.Installing Door Frame
Reserve holes for door and window, and fixing the holes by plywood line anchor.
10.Decoration
Sandwich wall panel do not need extra plaster for the surface, decorating the wall surface directly by tiles, wallpaper or other painting.
Contact us
Facebook: Freda Lin
Xiamen ZhongJingTai Building Materials Co,. Ltd
){kind=link}