| Customization: | Available |
|---|---|
| After-sales Service: | 5 Years |
| Warranty: | 5 Years |
|
Still deciding? Get samples of US$ 0/Piece
Order Sample
|
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
| Payment Methods: |
|
|---|---|
| Support payments in USD |
| Secure payments: | Every payment you make on Made-in-China.com is protected by the platform. |
|---|
| Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
|---|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Surface :fiber cement board/calcium silicate board
Interior filling materials: EPS / cement / fly ash / sand / additive 
Specification
| Length | 2270mm, 2440mm | |||||
| Width | 610mm | |||||
| Thickness | 60mm | 75mm | 90mm | 100mm | 120mm | 150mm |
| Weight | 40KG/m2 | 54KG/m2 | 60KG/m2 | 67KG/m2 | 74KG/m2 | 107KG/m2 |
| Partition | roof | roof | interior wall | interior wall | exterior wall floor | exterior wall |
ZJT EPS Cement Sandwich Panel is a kind of lightweight energy saving wall material, which uses cement calcium silicate or reinforced calcium silicate board as face panel, filled with cement, Expanded Polystyrene (EPS) foam particles, and as core material and forming by one time compound.
Advanatges of ZJT Eps cement sandwich panel
1. FAST INSTALLATION AND FIRE PROOF
Our pre-cast wall panels feature a tongue and groove
design that reduces installation times, increases labor
efficiency and saves on costs. Electrical and plumbing
installations can be completed 5 - 10 times faster when
compared to using traditional hollow blocks.
FAHSTWALL panels were also tested to withstand up to
1,000°C for 120 minutes and compliant to the standard for Grade A Fireproof Materia
2. ACOUSTICALLY EFFECTIV
A 42dB sound insulation test result complies with the
National Insulation Test Standard GBJ121-88.
Minimal sound transmission and noise reduction are
accomplished due to the higher density and unique
composition of the wall panel material. This results in a
more comfortable and quiet environment without the need
to use any additional insulation products thereby saving on costs
3. Highly Seismic Resilient
The tongue and groove design of our wall panels are
attached and secured using a firm sealant and adhesive.
This transforms multiple wall panels into one sturdy wall
with impact resistance and bending qualities that are better
than traditional brick walls secured with ordinary cement.
4. STRUCTURALLY SAFE AND ECONOMICAl
The lightweight materials used in our panels are 1/6th the
weight of normal 120mm thick brick walls and 60% lighter
than traditional hollow blocks. This minimizes the load on
the beams and columns which equates to significant cost
reduction on the structural frame of the building.
Our panels are also moisture proof, water resistant and
ready for painting as soon as they are installed and joined
using our firm sealant and adhesive
5. .THERMALLY EFFICIENT AND GREEN
The ZJT WALL system is much more thermally efficient
in heat absorption and dissipation due to its density and
the materials used. This results in a cooler interior
environment and cost savings from reduced air
conditioning usage.
Our wall panels comply with the Standard of Radiation
Hygiene and Protection of Building Material (GB6566-86)
making them environmentally friendly and safe.
| Item | Thickness | 60mm | 75mm | 90mm | 100mm | 120mm | 150mm | |
| 1 | Anti-impact Capacity | times | ≥5 | ≥6 | ≥6 | ≥6 | ≥8 | ≥8 |
| 2 | Anti-bending damage load | times over deadweight | ≥1.5 | ≥2 | ≥2 | ≥3 | ≥5 | 5 |
| 3 | Compressive strength | Mpa | ≥3.5 | ≥3.5 | ≥3.5 | ≥4.2 | ≥4.7 | ≥4.7 |
| 4 | Softening coefficient | ≥0.8 | ≥0.8 | ≥0.8 | ≥0.8 | ≥0.8 | ≥0.8 | |
| 5 | Surface density | g/m3 | ≤70 | ≤70 | ≤90 | ≤90 | ≤110 | ≤120 |
| 6 | Moisture rate | % | ≤10 | ≤10 | ≤10 | ≤8 | ≤8 | ≤8 |
| 7 | Unit vveight | kg/m2 | 42-44 | 50-54 | 56-60 | 63-67 | 71-74 | 85-87 |
| 8 | Drying shrinkage value | mm/m | ≤0.6 | |||||
| 9 | Hanging force | N | ≥1000 | ≥1000 | ≥1000 | ≥1000 | ≥1000 | ≥1000 |
| 10 | Sound insulation capacity in the air | dB | ≥35 | ≥38 | ≥40 | ≥40 | ≥45 | ≥45 |
| 11 | Fire endurance | H | ≥1.5 | ≥1.5 | ≥2.5 | ≥2.5 | ≥3 | ≥4.5 |
| 12 | Heat transfer coefficient | U-value W/m.K | ≤0.5 | ≤0.5 | ≤0.5 | ≤0.4 | ≤0.3 | ≤0.3 |
| R-value | ≥2.0 | ≥5 | ≥5 | ≥2.5 | ≥3.33 | ≥3.33 | ||
| 13 | IRA innner radiation index | ≤1.0 | ||||||
| 14 | IR outer radiation index | ≤1.0 | ||||||
| 15 | Frost resistance | shall show no visible cracks and surface should be no change | ||||||
| Item | Parameter Index Specifications | ||||||
| 60mm | 75mm | 90mm | 100mm | 120mm | 150mm | ||
| 1 | Anti-impact capacity/times | ≥5 | ≥5 | ≥5 | ≥5 | ≥5 | ≥5 |
| 2 | Anti-bending damage load/times over deadweight | ≥3.0 | ≥3.0 | ≥3.0 | ≥3.0 | ≥5.0 | ≥5.0 |
| 3 | Compressive strength/Mpa | ≥3.5 | ≥3.5 | ≥3.5 | ≥3.5 | ≥3.5 | ≥3.5 |
| 4 | Softening coefficient | ≥0.8 | ≥0.8 | ≥0.8 | ≥0.8 | ≥0.8 | ≥0.8 |
| 5 | Surface density(kg/m²) | ≤70 | ≤70 | ≤90 | ≤90 | ≤110 | ≤110 |
| 6 | Moisture rate(%) | ≤10 | ≤10 | ≤10 | ≤10 | ≤8 | ≤8 |
| 7 | Dring shrinkage value(mm/m) | ≤0.5 | ≤0.5 | ≤0.5 | ≤0.5 | ≤0.5 | ≤0.5 |
| 8 | Hang force(N) | ≥1000 | ≥1000 | ≥1000 | ≥1000 | ≥1000 | ≥1000 |
| 9 | Sound insulation capacity in the air(dB) | ≥35 | ≥35 | ≥40 | ≥40 | ≥45 | ≥50 |
| 10 | Fire endurance(h) | ≥1.5 | ≥1.5 | ≥2.5 | ≥2.5 | ≥3.0 | ≥4.5 |
| 11 | Heat transfer coefficient(w/m².k) | ≤2.0 | ≤2.0 | ≤2.0 | ≤2.0 | ≤2.0 | ≤2.0 |
| 12 | Inner radiation index | ≤1 | ≤1 | ≤1 | ≤1 | ≤1 | ≤1 |
| 13 | Outer radiation index | ≤1 | ≤1 | ≤1 | ≤1 | ≤1 | ≤1 |
| 14 | Frost resistance(shall show no visible cracks and surface without change) | _ | _ | shall show no visible cracks and surface without change | |||
| 15 | The combustion properties(A1 or A2) | _ | _ | A1 or A2 | |||
){kind=link}