| Grade: | Grade A |
|---|---|
| Thickness: | 60-180mm |
| Appearance: | Panel |
| Color: | Black and Gray |
| Material: | Non-Metal |
| Type: | Wall Panels |
| Samples: |
|---|
| Customization: |
|---|
Suppliers with verified business licenses
Audited Supplier 
ZJT EPS (Expanded polystyrene board) wall Panel is composed of exterior panels and interior core filling, to form a non-load-bearing light-weight composite wall panel. The exterior panels on both sides are 5mm calcium silicate board, and the middle core is filled with polystyrene beads & cement or ceramsite, polystyrene beads & cement.
Raw materials for products
Installation process
Products Advantages
1/ green
Raw material used in ZJT boards are 100% free of
harmful substances and are of A non-radioactive
products, meeting national standard GB6566-2001.
2/ lightweight, economic
The volume-weight for the boards only 750-800kg/m3 , the weight of 75mm thickness ZJT board is 60kg/m2, equal to 1/6 of brick weight, 1/7 of 120mm thickness masonry. Finally, ZJT boards reduce structural cost because of lightweight.
3/ increase valid space
Compared with 120mm thickness bricks, the thickness of ZJT wall decreases 85mm by using 75mm thickness ZJT boards. Thus, valid space increases 1/m2 per 11.8mm. in other words, it can increase 6/m2 per 100/m2 .
4/ moistureproof, waterproof
Experiment shows that the back side of water pools, made up by ZJT boards and special adhesives, will keep dry and leave no stains. During humid days, the boards will not condense water either. Therefore, ZJT boards are suitable to be installed in such wet areas as kitchens, bath rooms, basements because of its moistureproof and waterproof.
5./ easy and fast construction
The installation of ZJT boards is completely dry operation. It can be cut to adjust length and width at will. The process of installation is easy and fast, without the need of plastering. The wastage rate is significantly low, reducing construction waste.
Specification
Applications
1) • Interior wall, Partition wall & exterior wall:
It has been widely applied to interior partition of high-rise buildings, with the advantages of excellent fire-proof, best hanging force and easy installation.
2) Floor System:
It's much suitable for the floor plate of factory, workshop, warehouse, etc.
Packing and shipping
1). Free packing, normal pallet + packing belt
2). Standard exporting packing, good pallet+pearl wool+corner protective paper+packing belt+plastic thin film
3). Loading: Normally 18 pallets per 20' container or according to clients' requirements
Install process
In todat's market, time plays a major role and may be a deal breaker for construction companies and the developers. A lot of project failed to sustain the expected return of investments due to failure in finishing the project on time. However, our product, compared to the traditional block work building system, can be delivered to the site, installed and painted 5 times faster.
On a big project scale, 40%-60% of time spent on assembing, fixing, plastering and painting the blocks will be reduced. In other words, When use our ZJT panel it will not exist which take us directy to the second advantage which is cost saving.
Light weight composite sandwich wall panels installation process:
1.Put wire,transport board in place,popup or down the wall plate and gauge double in the respective axis mount.
2.Any use of drilling to cut according to wall plate specifications.
3.Put cement binder and wall board in foundation.
4.Put cement binder,two pieces of the tenon on one side cement to wipe polymer mortar on any tongue and sides.
5.Installation,firstly prepare for the installation of plate moved into connection location,wall correction with a crowbar,use force tightly,to let polymer mortar extrusion from the joints in high spirits.
6.Adjustment,use wood wedge to bit into the bottom of the wall plate so that it adjust vertical formation
7.Correction,fix,use more than 2m or 2m guiding rule to check vertical,flat correction.
8.Grout,fill the pulp,use polymer mortar to infill and flatness after correcting the wall body,use polymer mortar to fill the gap size up or down.
9.Fixed,upper part of wall panels with Φ6mm or Φ8mm steel reinforce in the middle of walls by 45 degrees to bit into,the bottom with "7shaped"ribbed steel,one head is bitten into concrete base,the other head is bitten into the wall plate
Simple installation process:
1.Put wire 2.Cutting 3.Put cement binder 4.Put cement binder
5.Adjustment 6.Installation 7.Correction 8.Fill the pulp 9.Fixed
Corporate Culture
The enterprise culture is the soul of a company and an
inexhaustible motive force for the development of enterprises.
Our company has the culture as following:
Firstly, the product should be market and environment-oriented.
Secondly, the new and advanced products should be shared
by the market and benefit customers. So, we will cooperate with our partners to
satisfy the customers to achieve a win-win situation.
Thirdly, all keep quality as our first concern.
Our core idea is: Unity, Innovation, and Mutual Development.
FAQ
1. Is EPS cement sandwich panel lightweight?
Yes, it is. Capacity six hundred and fifty to eight hundred KG per cubic meter, it is one sixth of brick wall, even is one half of aerated concrete block.
2. Is EPS cement panel fireproof?
Yes, it is. It control fire slipping out of the origin unit, prevent fire spreading, prevent toxic gas generating or insolating Through fire high temperature test for four hours, panels only have skin injury
3. Is EPS cement panel thermal insulation?
Yes, it is. EPS cement panel's composite material determines that it has excellent heat insulation and thermal insulation functions
4. Is EPS cement panel soundproof?
Yes, it is. EPS cement panel's surface is fiber cement board, interior composite material and the concave-convex grooves between two panels make it has excellent sound absorption and soundproof function. 100mm thickness isolate sound beyond 45dB, it's much higher than blockwork
5. Is EPS cement panel strength strong?
Yes, it is. Anti-impact performance is 1.5 times of the blockwork, With steel structure fixed, can make high levels, big span wall, overall anti-seismic performance is 10 times of normal blockwork
6. After installation can it be paint without putty?
Yes, it can. You can paint directly without putty, and also can decorate without plastering
Contact us
Xiamen Zhongjingtai Building Materials Co., Ltd
Unit2A, Lianchang Building, No6-8 Huli District, Xiamen, China
Contact person:Jodie Huang
TEL: +86-592-5216902 FAX: +86-592-5216319
Mobile +86-13695041249
website: zjteps.en.made-in-china.com
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}